MS3 Basic 1.8 Swap No Spark
4 Attachment(s)
Hello,
I was wary to post in this section, but I am having trouble diagnosing a spark issue with my MS Labs Basic. I do get spark while in test mode, but not when cranking. I am also getting combustion out of the intake. Engine was running perfectly prior to being pulled and has not been touched since. RPM is synced. I speculate it might be a grounding issue. Any suggestions would be appreciated. I have attached regular and composite logs below. Thank you for the help. Details about the car in question: 1993 with BP4W 1.6 MS Labs MS3 Basic 1.6 coils Wasted spark Batch fuel |
2 Attachment(s)
Hello again! I am still at it.
I tracked down my issue causing no spark, due to improper grounds. However, I am still having issues with the car. It will fire, but will immediately die. I attached a composite log and I am getting a strange inverted signal in the log which I believe is killing the car. Thanks again for looking. |
All times are GMT -4. The time now is 04:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands