MEGAsquirt A place to collectively sort out this megasquirt gizmo

MS3 Basic 6000 rpm backfire and check engine light

Thread Tools
 
Search this Thread
 
Old 04-07-2016, 05:43 PM
  #1  
Senior Member
Thread Starter
 
poormxdad's Avatar
 
Join Date: Dec 2010
Posts: 1,190
Total Cats: 103
Default MS3 Basic 6000 rpm backfire and check engine light

Gents,

I made some changes to my 1999 that warranted a new tune. Everything was going fantastic. I have not had any problems like this in the past. We were nearly done with the WOT tuning when it backfired at 6000 rpm and threw a Code 64 indicating a loss of sync. The Check Engine light came on. It happens at 6000 rpm regardless of throttle position. Otherwise, the car runs great. Starts and runs just fine below 6000, and even runs fine after the backfire. The Check Engine light does not come on if the engine is turned off then restarted, unless I crack 6000 rpm again.

I replaced the crank position sensor, but no change. Any ideas?

Thanks much,

poormxdad
poormxdad is offline  
Old 04-07-2016, 06:08 PM
  #2  
SADFab Destructive Testing Engineer
iTrader: (5)
 
aidandj's Avatar
 
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Default

How far out is the crank sensor placed?

This sounds exactly like the issue that we had on Eds car when I forgot to adjust the VR conditioning pots correctly. But from what I remember @Reverant uses a different circuit for the crank input.

He will be able to answer better.
aidandj is offline  
Old 04-07-2016, 06:40 PM
  #3  
Senior Member
Thread Starter
 
poormxdad's Avatar
 
Join Date: Dec 2010
Posts: 1,190
Total Cats: 103
Default

Originally Posted by aidandj
How far out is the crank sensor placed?
It's your basic hotel room key card, ~0.031".

This has to be a setting. It runs just fine. Pulls really hard, then bang. I haven't tried to keep going over 6000, but I don't think it will. It's like it has hit a rev limiter.

Thanks much.
poormxdad is offline  
Old 04-07-2016, 06:41 PM
  #4  
SADFab Destructive Testing Engineer
iTrader: (5)
 
aidandj's Avatar
 
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Default

Same thing with my issue. VR conditioner pots were set incorrectly. It lost sync at 6k rpm. Then wouldn't restart until it went all the way to zero and re-synced.
aidandj is offline  
Old 04-07-2016, 06:56 PM
  #5  
Senior Member
Thread Starter
 
poormxdad's Avatar
 
Join Date: Dec 2010
Posts: 1,190
Total Cats: 103
Default

My Friend, I have no idea what "VR conditioner pots" are.

I changed the pre-Rotrex intake piping by deleting the gutted MAF and adding a sealed cold air shroud. The restriction had been bad enough to require a retune. I gained nearly two pounds of boost, so there were extensive changes to the tune but everything seemed fine. When the backfire and loss of sync happened the second time, the tuner reloaded the previous tune. No change, so maybe it's NOT a setting.

This blows. I'm over my head and supposed to be on track Monday.

poormxdad
poormxdad is offline  
Old 04-07-2016, 06:56 PM
  #6  
SADFab Destructive Testing Engineer
iTrader: (5)
 
aidandj's Avatar
 
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Default

If you have to be on the track on monday then set the rev limiter to 5000rpm and go to the track.
aidandj is offline  
Old 04-07-2016, 06:59 PM
  #7  
Elite Member
iTrader: (16)
 
patsmx5's Avatar
 
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,293
Total Cats: 475
Default

Originally Posted by poormxdad
My Friend, I have no idea what "VR conditioner pots" are.

I changed the pre-Rotrex intake piping by deleting the gutted MAF and adding a sealed cold air shroud. The restriction had been bad enough to require a retune. I gained nearly two pounds of boost, so there were extensive changes to the tune but everything seemed fine. When the backfire and loss of sync happened the second time, the tuner reloaded the previous tune. No change, so maybe it's NOT a setting.

This blows. I'm over my head and supposed to be on track Monday.

poormxdad
Post your tune and I'll take a look.
patsmx5 is offline  
Reply
Leave a poscat -1 Leave a negcat
Old 04-07-2016, 06:59 PM
  #8  
SADFab Destructive Testing Engineer
iTrader: (5)
 
aidandj's Avatar
 
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Default

A loss of sync is not from a tune.

Post a log
aidandj is offline  
Old 04-07-2016, 07:25 PM
  #9  
Senior Member
Thread Starter
 
poormxdad's Avatar
 
Join Date: Dec 2010
Posts: 1,190
Total Cats: 103
Default

Originally Posted by aidandj
If you have to be on the track on monday then set the rev limiter to 5000rpm and go to the track.
I thought about that, but if something gets worse I'm 300 miles from home. I haven't registered yet, so I'm not out any coin, just the joy.

Here's one of each, tune and log.

Thanks,

poormxdad
Attached Files
File Type: msq
AAMV2RotrexColdAir.msq (177.3 KB, 129 views)
File Type: msl
2016-04-06_10.54.43.msl (94.1 KB, 99 views)
poormxdad is offline  
Old 04-07-2016, 07:28 PM
  #10  
SADFab Destructive Testing Engineer
iTrader: (5)
 
aidandj's Avatar
 
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Default

I see 4 lost syncs. 2 reason 32 and 2 reason 31.

Those are both cam signal issues. Have you tried replacing the cam sensor?

Still waiting on a reply from Reverant.
aidandj is offline  
Old 04-07-2016, 07:30 PM
  #11  
SADFab Destructive Testing Engineer
iTrader: (5)
 
aidandj's Avatar
 
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Default

Taking a composite log of the issue would also help.
aidandj is offline  
Old 04-07-2016, 07:38 PM
  #12  
Senior Member
Thread Starter
 
poormxdad's Avatar
 
Join Date: Dec 2010
Posts: 1,190
Total Cats: 103
Default

Originally Posted by aidandj
I see 4 lost syncs. 2 reason 32 and 2 reason 31.

Those are both cam signal issues. Have you tried replacing the cam sensor?
No. It's on the agenda for tomorrow if I don't get some kind of other definitive answer.

Thanks,

poormxdad

Last edited by poormxdad; 04-07-2016 at 08:23 PM.
poormxdad is offline  
Old 04-08-2016, 04:10 AM
  #13  
Elite Member
iTrader: (10)
 
Reverant's Avatar
 
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,976
Total Cats: 355
Default

Take a composite log.
Reverant is offline  
Old 04-08-2016, 10:39 AM
  #14  
Senior Member
Thread Starter
 
poormxdad's Avatar
 
Join Date: Dec 2010
Posts: 1,190
Total Cats: 103
Default

Originally Posted by Reverant
Take a composite log.
I can't post a log right now but I did swap in a new cam position sensor. No change.
poormxdad is offline  
Old 04-08-2016, 02:02 PM
  #15  
Elite Member
iTrader: (16)
 
patsmx5's Avatar
 
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,293
Total Cats: 475
Default

Originally Posted by poormxdad
I thought about that, but if something gets worse I'm 300 miles from home. I haven't registered yet, so I'm not out any coin, just the joy.

Here's one of each, tune and log.

Thanks,

poormxdad
Try this, see if it's fixed.
Attached Files
File Type: msq
poormxdad_2016-04-08_13.00.53.msq (177.4 KB, 118 views)
patsmx5 is offline  
Old 04-08-2016, 02:04 PM
  #16  
mkturbo.com
iTrader: (24)
 
shuiend's Avatar
 
Join Date: May 2006
Location: Charleston SC
Posts: 15,176
Total Cats: 1,680
Default

Originally Posted by patsmx5
Try this, see if it's fixed.
Can you say what you changed? I am just curious and to lazy to go through both tunes and figure it out myself.
shuiend is offline  
Old 04-08-2016, 03:07 PM
  #17  
Elite Member
iTrader: (16)
 
patsmx5's Avatar
 
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,293
Total Cats: 475
Default

Originally Posted by shuiend
Can you say what you changed? I am just curious and to lazy to go through both tunes and figure it out myself.
Opps, sorry. Changed noise filtering.
patsmx5 is offline  
Old 04-08-2016, 05:40 PM
  #18  
Senior Member
Thread Starter
 
poormxdad's Avatar
 
Join Date: Dec 2010
Posts: 1,190
Total Cats: 103
Default

A few things.

First, I can't find an option for Composite log. I thought it would be in Tools.

Second. When I was at VIR a couple of weeks ago, I ran over the gator coming out of the Oak Tree turn. It shook the crap outta the car and I got a check engine light. No drivability issues though. I came into the grid, turned the car off and back on and all was well. No apparent issues till on the dyno a couple of days ago. I'm checking connections now.

I've got Shadow Dash installed on my cell phone. I hooked it up on the way home from work a little while ago and although it went through all the right notifications--it told me it was connected, loading the file and was going online, it never actually went online. Symptom?

Thanks for everyone's help so far. Beers on me if the opportunity arises.

poormxdad
poormxdad is offline  
Old 04-08-2016, 06:42 PM
  #19  
Senior Member
iTrader: (3)
 
midpack's Avatar
 
Join Date: Jul 2011
Location: STL
Posts: 524
Total Cats: 24
Default

Composite logger is under the Diagnostics and High Speed Loggers tab
midpack is offline  
Old 04-08-2016, 06:45 PM
  #20  
Senior Member
Thread Starter
 
poormxdad's Avatar
 
Join Date: Dec 2010
Posts: 1,190
Total Cats: 103
Default

Originally Posted by patsmx5
Try this, see if it's fixed.
Pat,

Your tune made the dropoff and Check Engine light come on at about 4000.

Since I can't seem to figure out how to make a composite log, I made a log with the SD card I have hooked up to the MS. Not sure if it will help. This should be from Pat's tune.

Thanks,
Attached Files
File Type: msl
2016-03-27_20.56.38_LOG0000.msl (1.04 MB, 106 views)
poormxdad is offline  


Quick Reply: MS3 Basic 6000 rpm backfire and check engine light



All times are GMT -4. The time now is 12:24 PM.