MS3 Basic 99-00 Loose Jumper in case
 

I am finally getting around to attempting to get a used MS3 Basic I bought on the forum into my car (life got in the way for a few months) and noticed that there was something shaking around in the case. I opened it up and found a loose jumper just flailing around in there. While i was in there i also found what appears to be a capacitor and a resistor soldered to the board leading nowhere? Anybody with an MS3 basic (99-00) have this going on? Any thoughts where this jumper should be? Let me know if the pictures don't work. I reached out to Dimitris without luck.
https://cimg4.ibsrv.net/gimg/www.mia...d1c13de85d.jpg
https://cimg6.ibsrv.net/gimg/www.mia...86bc3f43b0.jpg
https://cimg8.ibsrv.net/gimg/www.mia...6e1024ccd8.jpg
https://cimg9.ibsrv.net/gimg/www.mia...ac70912165.jpg
https://cimg0.ibsrv.net/gimg/www.mia...b6662a32d6.jpg
Unconnected cap and resistor??

I know this is a pretty stupid noob level post but if I don't get it sorted out I'm hesitant to throw it in the car, effectively making it an expensive useless aluminum box.............