MS3Pro: Audi R8 Coils Dwell Settings
 

I've been running LS coils with my MS3Pro for a while now and am looking into converting to an Audi R8 coil kit. I have not found anywhere the instructions or the configuration in TunerStudio for these coils. There is very little information about it and I have only found a dwell table for the Link ECU based on RPM and voltage:
https://cimg5.ibsrv.net/gimg/www.mia...0df17bf06b.png
In TS the Dwell Table is based on the Load (Kpa) or the Dwell Battery Correction table is based on a percentage, so it is difficult to convert. I also do not know the parameters that I must indicate in the Ignition options / Wheel decoder.
Anyone running R8 coils want to share their TS setup? Needed:
- Ignition Options
- Dwell Table
- Dwell Battery Correction Table
I will appreciate all the help received

FlowForce should have it. He's a vendor on this forums. Google his website for the R8 instructions.

I second this. Scroll to bottom for R8 coil info https://goflowforce.com/ls-coil-instructions

Don't forget to change crank dwell to 4 as well. I've been running mine for awhile now, doing great.