MSPNP MM9697 Beta Testers Needed in Atlanta Area
 

Anyone interested please shoot us an email at websales@diyautotune.com with the subject line 'MSPNP MM9697 Beta Tester Application'.

Tell us:

1. Year of your car (1996 or 1997 only)
2. Condition, Mileage
3. Is it your daily driver?
4. N/A, Turbo, Supercharged?
5. Any current engine management related mods? (piggyback, FMU, hackjob bandaid?)
6. Your technical ability and tuning experience
7. Your board name here on MT.net

Must be manual tranny
A/C must be operational
Must be in the greater Atlanta Metro area, close enough to bring the car into our shop when needed.


We need:

• One car that's bone stock or very close to it
• One car that's turbocharged
• One car that's supercharged

If you're selected (and not everyone can be, sorry), you'll get a good price on a beta MSPNP MM9697 and free tuning. The expectation from your end will be cooperation and flexibility through the beta testing process and beyond as we test and launch the product.


The good news, our 97 n/a loaner car is running like a champ ;). 120wtq and 127.5whp. That's on a 10:1 forged internal motor with ARP fasteners.

sounds like a lucky man :bigtu:

Man, if only you were in Indy not Atlanta.

Man, if only you were in Atlanta not Indy.

;)

Haha, no kidding!

*goes back to assembling MegaSquirt*

I'm in Tampa.... too far from Atlanta?

That would be a pretty tough drive if we needed to make changes and or retune and whatnot I'd think....

I know, it was just wishful thinking

I'm only 5.6 miles from you.

If you want to mail one out to Cali, I have a bone stock 97 :)

but your still 5 hours away at 6 a.m. and 6 p.m. :gay:

So I see you've visited the area before ;)

Damn i wish we could get our 96 in on this. 105K miles AC/PS, no major mods other than a KN and good fluids, and diret FP rewire.

I think I may have nailed down the stock car here locally-- turbo and S/C car are still up for grabs....

cool--was it Grant & his white 96?

Don't think I've heard from Grant-- I'm talking to Matt out in L'ville.

Grrrrr, if only you guys were in NY.

97 M, 20k miles, Bone stock.

---

Will you guys be posting the MSQ file from the 96/97 like you do with the others?

Yep

Just out of curiousity, do you suspect the 96-97 fuel/spark maps will differ much from the 94-95?

I suspect that the maps will be very similar...

how about testers in cali?

I'm looking for testers nearby right now... I've got the capability to properly tune and if needed, troubleshoot the cars firsthand. That's not do-able from any other location....

makes sense. when is the approximate release date for mm9697? i dont think i will ever come around installing my megasquirt otherwise!

i want to pre-order it. is it possible?

We've always shyed away from pre-orders for the most part as I don't like to have people's money until I'm ready to ship their product, but once released (think 6 weeks probably as we want to thoroughly beta test under all conditions) we'll have plenty to go around so you'll still get it just as fast if you order when released as if you had pre-ordered it...

gotcha. any way i can get my hands on beta version? i need to get up and running in few weeks. i missed HIN last saturday (was supposed to show my miata there) because my suspension was delayed but now im shooting for new deadline of october 27th so i can show this car at SEMA.

My 94 with a stock drivetrain is just sitting at Dyno4mance in Calhoun, GA now. It runs great, i am just driving the STi for a few weeks and the Miata is just sitting there waiting for the upgrade fairy.

I can't wait for this to be available - always wanted to play around with engine management hardware/software and this looks to be a good starting point for my 97. Hopefully you found enough people to test it sufficiently. :yippee:

MSPNP free beta testing FTW ;)

Siegel

Foundsoul, would I be correct in assuming that the biggest obstacle you guys have with the 96-97 pnp is the move of the vital sensors to the middle connector?

I havent seen a PNP from the inside but I would imagine you guys need to print a whole new circuit board.

That went failrly quickly actually, and yes a new circuitboard was required... we're in beta testing making sure everything is PERFECT.

What's up Siegel?

As for beta testers with a 96 or 97 car, I'd be interested in 1 or 2 more maybe. But it's required you are in the Atlanta area and that you can be somewhat flexible, others please don't even ask. I'd do it if it made sense but it just doesn't.

Hey Jerry. Happy T-Day. I'm just trying to get my postcount up, I mean trying to be helpful on the board until I can PM people about buying their turbo stuff ;)

Siegel

Any news?

I want a 9697 msq file. Cmon Jerry. :D

You pussy, tune your own car.

Why arent you on AIM?:vash:

I gotta drive to Jersey on sunday, I gotta get the shit tuned by then. Plan to go out tomorrow and try to carefully datalog.

The MM9495 map will get you VERY close..... Only minor changes are needed.

Any news on the mspnp 96/97? It's taking a lot of effort not to spend this money on something else. :)

We're just trying to finish up some details with the beta testing, I've got two beta testers coming in this week to help with this, one existing and one new, and we're working as fast as we can to get this perfect and out the door to you guys. It's in our best interest too ;).