|
MSQ please...
I got a friend replacing a 1.6 turbo motor with a 1.8 (stock) NA motor and was using MSI 2.25 MS/E HR10. I only have a MSQ for the turbo setup, anyone got a 1.8L NA tune I can start with?
Using 1.6 coils GM AIT sensor Currently no IAC but will be wired up ASAP No TPS Thanks Mike@icantdo55.com |
Nobody?
|
1 Attachment(s)
This is one of the last decent msqs I have saved from when I was running MS1. This is for a n/a 1.8 with the stock 265cc injectors. I was running Hires 10g, and it was a parallel install so you will need to configure any settings for idle as I had the stock ECU doing that. Judging by the dwell settings, I was using the stock 1.8 coils here. Not sure what, if anything, would be different about the 1.6 coils. Also I was using TPS-based accel enrich so you will have to switch that to MAPdot until you get a TPS.
|
Originally Posted by ScottFW
(Post 734765)
This is one of the last decent msqs I have saved from when I was running MS1. This is for a n/a 1.8 with the stock 265cc injectors. I was running Hires 10g, and it was a parallel install so you will need to configure any settings for idle as I had the stock ECU doing that. Judging by the dwell settings, I was using the stock 1.8 coils here. Not sure what, if anything, would be different about the 1.6 coils. Also I was using TPS-based accel enrich so you will have to switch that to MAPdot until you get a TPS.
|
| All times are GMT -4. The time now is 01:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands