My MS3x build questions... done and now with pics
O.K. build is finished - built the 2nd baro circuit, alternator control circuit, the alternator warning light and the EGT circuit. Everything is mounted and cuts in the housing are made... gonna post pics tomorrow.
As Frank mentioned in his "How-to" - the hex-standoffs for the MS3 daughtercard are ~2mm too long, so the USB port won't fit into its hole... Apart from that I can only give the biggest kudos to Frank - as the Howto is perfect. |
Are they on top of a FET?
|
well... yes ...ahhhh - so if there is a FET on this spot you have to cut the standoff shorter...makes sense, as there also could be no FET in this spot.
|
or dont use a nut below it?
|
Originally Posted by Braineack
(Post 833018)
or dont use a nut below it?
|
k. was curious. i made that mistake once, but i have a few different sized standoffs...I acutally have to stack a few washers between the standoff and ms3 board.
|
FINISHED it Ladies...
22 Attachment(s)
So I got it all finished and set up...
Here are the pics: Enp-plate with the not fitting USB connector due to the too long hex-standoffs https://www.miataturbo.net/attachmen...ine=1328858529 Side-view of the USB port https://www.miataturbo.net/attachmen...ine=1328858529 Proto area with the EGT and alternator control circuit https://www.miataturbo.net/attachmen...ine=1328858529 Alternator warning light build in the existing injector output after Franks description http://www.ingenieure-reichel.de/upload/MS/MS3X_004.jpg Cut the standof - now it fits https://www.miataturbo.net/attachmen...ine=1328858529 Other endplate - I cut an endplate of an old soundcard to put my DB15 connector in https://www.miataturbo.net/attachmen...ine=1328858529 Closed the lower DB37 hole with the included blanking plug https://www.miataturbo.net/attachmen...ine=1328858529 All closed and done... (damn it's tight in there) https://www.miataturbo.net/attachmen...ine=1328858529 Other side with the 64pin ECU connector https://www.miataturbo.net/attachmen...ine=1328858529 Another angle - isn't it a beauty https://www.miataturbo.net/attachmen...ine=1328858529 Running on my 99-00 jimstim https://www.miataturbo.net/attachmen...ine=1328858529 Running on TS (you can see the difference in MAP and Baro of 0.5 kPa) https://www.miataturbo.net/attachmen...ine=1328858529 |
That is damn clever. Props to Frank for coming up with this.
|
All times are GMT -4. The time now is 06:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands