Need Help with IAT sensor not reading
Hello
so here is how it started in IN NJ with this crazy weather so on Monday my NA starting running to LEAN according to my gauge so i was like may be is because is really cold so i did not to much mind to it then on Wednesday it was warmer around 60f and started running to Rich then i connected my laptop and the air temperature is not reading so i check cables and everything is fine so next ck the Sensor with a voltmeter and a hair drier and the voltage change now idk what ells can be wrong why is not reading the temperature im running on MSMPNP 1 Please Help |
Exactly what voltage did you measure?
Are you using the project for "no MAF"? |
the reference wire positive showing me 4.2v and i also test the ground and show me 12v
and yes i remove the AFM |
Are you saying you had 12 volts on the IAT sensor? I'm confused.
|
No I found the problem the connection on the main harness what split now I repair it and everything work well until today the temperature sensor started acting up again so I check the cable repair every look fine but now the inside if the sensor looks lose??
|
All times are GMT -4. The time now is 01:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands