Need picture of case
 

Been trying to find a pic on google but gave up after a good hour of surfing.
Anyone have a picture of a stock MS without endplate.
Something similar to this (but this is not a stock case):

http://westfieldmx5.devocht.com/star...e/DSCF4953.JPG

go to boostedmiata.com/gallery2 and search in the megasquirt section, I have tons of pics. I just can't see what you posted nor access my own site :(

Need something in particular Frank?

I'm wondering if what I did can be done with a stock case (76pin connector inside the case). If you look closely, you'll see that my case is a bit higher than stock. It's a 12slot case that I cut up to 7 slot height.

ps, Brain, can't find one on your site.

Stock case doubtful. but the MS3 case probable.

Well the stock case is 40mm high internally if that helps.

thx, mine is about that so the stock case will work fine.