no fuel from injectors 2 & 4
Last night I finally got around to installing MS. My car will fire right up but its only running on 2 cylinders. Every cylinder has a good spark and I checked my firing order and that looks correct. If the car is running and I disconnect injectors 2 and 4 it does nothing. The car still idles the same. I double checked my wiring and connections and so far they look ok. I still need to get my meter and check for continuity.
Anything else I should check? |
you can jump a 9v battery to the injector and if it is good, it will click. Are these new injectors?
|
Injectors just came back from getting cleaned and flowed.
|
I would have said CA car, but shouldn't matter for 91. Email me your VIN (ben at mazmart dot com) and I'll run it through EPC on Monday.
|
Just checked the continuity from the injectors to the MS connector and it fine. There is a yellow wire that powers 2 injectors and a yellow/black wire that powers the other two. I'm thinking there is something wrong with my MS.
|
I saw somewhere a couple of days ago that 2 and 4 are batched. Probably something in your MS.
|
|
Cleaned the board, reflashed firmware and map, started car again. I get fuel to all cylinder now but I'm fighting some other problems. I'll keep you posted.
Thanks! |
All times are GMT -4. The time now is 01:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands