No start after driving.
 

94', MSPNP2.
So here's another issue.

Went for a drive after trying to adjust the idle settings and now the car won't start at all. Doesn't even try to catch. I'm at a complete loss on this one, so any help would be greatly appreciated.
Here's my datalog and tune as well.

Bump, and an update.

It's not the next morning, and the coolant and air temp are both below 60F, and it's doing the same thing. Refusing to start.

I'm getting a new error code on my MTX-L that says E9 during cranking, but it shouldn't have power during cranking anyway since it's connected to the ignition wire.

Your tune is so far off it could be because of so many reasons. It is seriously off. MAT, WUE AFR, timing, IAC open & closed settings everything is wrong.

Well, it ran perfect with that tune, and the timing is set perfect for the car. As for the ignition map, I haven't touched that since it's the basemap for the 94'. So I'm not sure about that.

I just tested for spark and I'm getting nothing to all 4 cylinders. Does the MS override fuel injection even if the CAS is going out? Since I'm getting fuel, but absolutely no spark.