megasquirt 93 CA miata ???
11-27-2009, 08:24 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2008
Location: ATL GA
Posts: 295
Total Cats: -216
megasquirt 93 CA miata ???
will my 93 CA wierd miata work with a diypnp mega squirt that was ordered to work for a 91??? i know the fuel injector wireing is changed a bit for 93. please any one any help thanks, i have searched and dont know if it will work.
Reply
0
0
11-27-2009, 10:43 PM
#3
Junior Member
Thread Starter
Join Date: Sep 2008
Location: ATL GA
Posts: 295
Total Cats: -216
what do u mean wireing it up,, i got the PNP , all i have to do is plug it in and run it. i am wondering if the 93 ca car needs a 93ca pnp computer or will the 91 work? the 93 CA car was sequential injected. it has 2 extra wires in the harness.
Reply
0
0
11-27-2009, 10:46 PM
#4
Junior Member
Join Date: Nov 2009
Location: Palo Alto, CA
Posts: 50
Total Cats: 0
I'm in the same boat, actually. If I understand correctly I could use the optional sequential injection board for the DIYPNP if I want to keep the sequential injection - OR, I could just forget it and revert back to bank injection. Does it matter much? Nobody seems to think it does ... can anyone confirm either way?
Reply
0
0
11-27-2009, 11:10 PM
#6
Junior Member
Join Date: Nov 2009
Location: Palo Alto, CA
Posts: 50
Total Cats: 0
Here ya go:
DIYPNP Sequential Injection Kit DIYAutoTune.com
But I'm not sure if it's really necessary...
DIYPNP Sequential Injection Kit DIYAutoTune.com
But I'm not sure if it's really necessary...
Reply
0
0
11-28-2009, 12:08 AM
#7
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,026
Total Cats: 6,592
The ECU connector is the same, and the only difference is the extra two injector wires. If you want to keep it simple, just parallel the 1/3 and 2/4 injector lines together. This is how the regular MSPnP (and all other MS1 installs) work for CA93 and 94+ cars.
You can add the sequential daughterboard and run four-channel if you want to, but you don't have to. I'd wager that most of us are still running two channel, regardless of year. The change to full sequential was mostly about idle emissions.
You can add the sequential daughterboard and run four-channel if you want to, but you don't have to. I'd wager that most of us are still running two channel, regardless of year. The change to full sequential was mostly about idle emissions.
Reply
0
0
11-28-2009, 12:25 AM
#10
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,026
Total Cats: 6,592
I don't know that I'd call it a "mod" per se, since with the DIYPnP you're free to wire it however you want. Just make sure that the Inj1 driver is wired to both 2U and 2Y, and that Inj2 is wired to 2V and 2Z.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM
