Post up your 460cc and 550cc settings
 

Just wanted to get a general idea of what kind of numbers you guys with 460cc or 550cc injectors were running.

So if you don't mind...
Post up your: Cranking Settings and Acceleration Wizard

These are with 440cc on HiRez. Note that numbers below 60° haven't actually been tested, as it doesn't get cold here.
You don't want to see my accel settings, just trust me...

http://img84.imageshack.us/img84/8172/crankingyn7.gif

Joe, are you running with idle valve control?

-Mike

He's running standalone so I'm sure he is.

Yes. The following idle setting assume that the flyback diode is across the IAC valve. When I first built my system I forgot it, and after I installed it I had to radically change my idle config. These settings give a "good" idle at ~14.7, and a downright perfect idle at 13.5 - 14. Also note that the "Cranking (dc)" parameter on this screen is a crucial part of the cranking config. It gets you "over the hump" between true cranking and actually achieving a stable idle.

http://img404.imageshack.us/img404/3143/idleco9.gif