putting the spades in the connector
 

holy crap makeing the harness sucks. Does anyone have pictures on how to shove the spades into the connectors?

Little more info, perhaps?

So that we're all on the same page, these are fork/spade terminals:
http://www.partsexpress.com/images/095-232t.jpg


Is that what you're referring to? What exactly are you trying to shove into what? (no profane answers, children. We're all thinking it.)

take it out to diner, give it a ton of booze, say its pretty and it will slide right in

it puts the spade in the connector
else it gets the hose again

are you kidding? even a two year old can put a peg in the appropriately sizes/shaped hole.

are you talking about the female connectors fitting over the prongs inside the clip? if so loosen up the connectors with some needle-nose pliers

dont forget to cuss alot

ive been usin that and alot of brute force.. seems to work deicent so far.

What connectors are you talking about?

for ze MS boomslang harness.

they only fit in one direction. you must make sure the crimped end the holds the insulation down isn't too large. they click when they are in place.