Dwell settings for 2001+ coils
#1
Dwell settings for 2001+ coils
I just need a little clarification here. I found this thread while searching for dwell settings https://www.miataturbo.net/engine-performance-56/stock-ign-dwell-01-a-55579/.
It basically says measured dwell is 5ms and there are a couple of tables posted at various voltages.
My Tuner Studio shows the voltage correction as a %, not individual values.
So, is the "nominal dwell" value 5ms? Is that at 12 volts?
the table posted (by someone other than Reverant who measured the actual dwell at 5ms) shows :
10v 5.88
11v 4.4
12v 3.44
13v 2.84
14v 2.4
15v 2.0
I'm a little confused here. Not looking to fry my coils when I finally swap in the VVT engine.
It basically says measured dwell is 5ms and there are a couple of tables posted at various voltages.
My Tuner Studio shows the voltage correction as a %, not individual values.
So, is the "nominal dwell" value 5ms? Is that at 12 volts?
the table posted (by someone other than Reverant who measured the actual dwell at 5ms) shows :
10v 5.88
11v 4.4
12v 3.44
13v 2.84
14v 2.4
15v 2.0
I'm a little confused here. Not looking to fry my coils when I finally swap in the VVT engine.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM