Racepak. It works yall.
After several years of working with Racepak, I'm finally able to announce true, proper, real mutual cross-compatibility between MS2/MS3 and Racepak display and datalogger devices.
This is what is required: MS2 running MS2/Extra firmware 3.4.x or newer or MS3 running MS3 1.4.x firmware or newer and MegaSquirt to Racepak CAN Interface Module: 230-VM-EFIMSCAN This CAN module supersedes Racepak's prior serial interface for MS2. This allows compatibility with any Racepak dash/datalogger system; IQ3, G2X, G2X Pro, V300, Sportsman, UDX, etc The EFI Interface Module is priced at $375, like most of Racepak's other Interface Modules. Questions? Let me know, I coded the thing. ;) |
F*** YEAH! Thanks guys for getting this tested and working!
|
That is fantastic. What are you planning on doing for speed (MPH or KPH)?
|
Originally Posted by SteadFast
(Post 1244514)
That is fantastic. What are you planning on doing for speed (MPH or KPH)?
Also, I concede that my video sucks. We'll do a more proper one later. |
VSS fed from an MS3 is going to be more robust than GPS-based VSS. Occasionally my Racepak will struggle to find satellite signal for the first minute or two, and that would be annoying in a street car. If you have the option, use the VSS provided by the MS3.
|
Ben, where can I purchase this module? I don't see it online and guessing it is very new and most site will not be updating their database.
|
Originally Posted by bcrx7
(Post 1244844)
Ben, where can I purchase this module? I don't see it online and guessing it is very new and most site will not be updating their database.
|
I can get them on the site a bit sooner - but we're going to have a pro photographer get some pictures of them, so I'm waiting on that to get the Racepak stuff listed. But as Ben noted, email us at websales@diyautotune.com if you want one right now.
|
I'll send you guys an email. Thanks Matt and Ben!
|
Do you know if this compatibility includes the MS Labs MS3's as well or just diyautotune MS3's?
I ask because if I remember correctly, Rev's firmware is different from the standard firmware. |
Originally Posted by FrankB
(Post 1245675)
Do you know if this compatibility includes the MS Labs MS3's as well or just diyautotune MS3's?
I ask because if I remember correctly, Rev's firmware is different from the standard firmware. That said these devices communicate via CAN so would be unaffected anyway. |
All times are GMT -4. The time now is 01:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands