Request for someone to critique current log/program
 

Guys,

Still very new to this and have been running some VE analyze to make improvements. The only issue I have currently is:

1) Warm car requires a blip of the throttle to start
2) If AC tuned on, car almost dies before idle up occurs

Any help appreciated!

More info? I can take a look later, but probably need some more info if I can be of any help at all

1) Raise value IAC Valve opens during warm crank.

https://cimg8.ibsrv.net/gimg/www.mia...0e7ea887ee.png
2) More complex, my suggestions are to utilize the closed loop idle initial value table and get that filled out, then consider modifying the A/C idle up page. Would recommend more of a delay on the idle up (mine is 650ms with spal fans to help prevent the dip) and a CL Load allowance being set so you aren't knocked out of closed loop idle if it jumps up a bit. 330 RPM for AC is a lot, you can set the base idle to 850 and the adder to 150 like stock and tune around those values.

https://cimg5.ibsrv.net/gimg/www.mia...3fbda2ad11.png