Reverant MS2 problem
Hey guy's when trying to install my reverant enhanced ms2 a few days ago I ran into a couple of problems with the firmware. After doing so reading online I decied to flash the box using the firmware from the DIY website(http://www.msextra.com/doc/ms2extra/....html#download)
Looking back on it I am not sure this was the best move. I am no longer getting firmware errors but I am not able to load any of the base tunes I found online. I am thinking at this point I need the firmware reverant uses and a base tune but I am still a noob so maybe you guys have a better idea... Also I did PM reverant but no answer is there a better way to contact him ?? Thanks |
He's a busy guy and he will get back to you, his business email is :
|
Originally Posted by cheezitnation697
(Post 1079925)
Hey guy's when trying to install my reverant enhanced ms2 a few days ago I ran into a couple of problems with the firmware. After doing so reading online I decied to flash the box using the firmware from the DIY website(http://www.msextra.com/doc/ms2extra/....html#download)
Looking back on it I am not sure this was the best move. I am no longer getting firmware errors but I am not able to load any of the base tunes I found online. I am thinking at this point I need the firmware reverant uses and a base tune but I am still a noob so maybe you guys have a better idea... Also I did PM reverant but no answer is there a better way to contact him ?? Thanks |
cheezit,
IIRC, flashing Reverant-made ECU's with firmware that is not his can brick the ECU. You may need to confirm this with him. And yes for bahurd's post above, include the ECU S/N, as this makes it easier for Reverant. Good luck. |
All times are GMT -4. The time now is 03:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands