Still no crank on 96 with Ms3X
12-03-2017, 03:49 PM
#1
Newb
Thread Starter
Join Date: Apr 2017
Location: Atlanta, Ga
Posts: 14
Total Cats: 0
Still no crank on 96 with Ms3X
I hate to repost but I've tried and tried and gotten nowhere with seeing the crank. I'm willing to send it to someone if they can help :/
I Used the Trubokitty guide to assemble a MS3X.
- Checked the harness multiple times
- Done the necessary jumpers listed in the guide (tach, flyback to Xboard, etc.)
- Tuned the pots like in the guide (Checked with a multi meter as well..)
- Using the 96-97 base tune
- I see coolant temp, tps, the narrowband, and map
- Gapped the crank sensor appropriately.
When I go to crank with the MS installed I can't seem to get it to fire, It's definitely injecting fuel though. Feeling like an extreme noob right now with all this. Maybe even with all the board mods I'm still missing the crank sensor somehow? When I did a log I got tooth time and I saw green and red, but only one blue spike when I left off the starter.
Any suggestions?
I Used the Trubokitty guide to assemble a MS3X.
- Checked the harness multiple times
- Done the necessary jumpers listed in the guide (tach, flyback to Xboard, etc.)
- Tuned the pots like in the guide (Checked with a multi meter as well..)
- Using the 96-97 base tune
- I see coolant temp, tps, the narrowband, and map
- Gapped the crank sensor appropriately.
When I go to crank with the MS installed I can't seem to get it to fire, It's definitely injecting fuel though. Feeling like an extreme noob right now with all this. Maybe even with all the board mods I'm still missing the crank sensor somehow? When I did a log I got tooth time and I saw green and red, but only one blue spike when I left off the starter.
Any suggestions?
Reply
0
0
