Small Megasquirt Problem
 

hi all, well i finaly modded my megasquirt 2.2 with help from a few kind gents here, and built my Jimstim to test the squirt, i followed the instructions in brains thread on how to program it with MS/Extra hr_10g all went well after a few trys lol but when it comes to the spark setting, thats where the problems starts i don't have it in my Megatune, am i missing something here
i have attached a pic of the megatune running as you can see there is no spark tab. Maybe someone here can enlighten me on what i may have none wrong or not done.

Cheers
Dr.

Happens to me sometimes for no obvious reason. Open some unrelated dialogs, close them, see if "Spark" magically opens up.

ok i got the spark tab to work when i went to codebase and outputs functions and changed the Distributor setting to MSnS, but when i recycled the megasquirt it stop working and got a error in the bottom tab's, hmm i think i need to do some more reading about the settings

Dr.

is your car stock? do you need a basemap?

Braineack

Yes mate its bog stock at the moment,i must point out i am bench testing this with the jimstim, and the error i am getting is related to the Fuel pump, and yes i think i do need a base map for this, as this is a very big learning curve for me, but so far it has been one of the most enjoyable learning curves thanks to you guys.

My motor is a 1989 1.6 litre stock as a rock all i need is time and money to make it better

Cheers
Dr.

ok loaded up a base map found on this forum, and all is working and seems to be fine in bench testing, so now its just matter of getting it installed when i get the motor in the car and do some tuning. Oh its so much fun fun fun lol. Thanks all for the hints and help.
Plus all i can say is thank God for miataturbo.net i would be screwed if it was not for you guys.

Cheers
Dr.