Table switching with AC idle up, DIYPNP ms2extra 3.3.2
 

So, I'm not entirely sure gslender is relevant or not any more. It seems 3.3.2 has the ac idle up code and "adaptive" idle advance driven off cl pid. I don't see a way to switch tables with ac, though, the one feature I think may be missing.

However, I don't get a conflict if I try to set both table switching and ac idle up on PE1. I'm thinking it will work, but thought I'd ask before I break stuff. Not that I ever use ac, especially in this part of the year...

Besides these features, is there anything else I missed in searching?

you'd have to split the a/c switch into pe1 and something else.

why you'd need tableswitching maps to trigger against the a/c is beyond me. what works better is tuning.

I use W or ALED to run the AC clutch, works pretty good as is already.

I think it was you talking about running more timing down low with AC on, which is what I was going towards, although I probably don't really need it. Besides the idle dropping on it's face immediately after switching AC off, it works fine, doesn't stall. I was thinking more idle timing might equal less IAC duty, which might make the drop less intense?

Breaking things to break them...