TPS Scale??
Hi just wondering from where i get the TPS Scale for my tables?
MY TPS goes from min: 29 to max: 191, i use the miata automatic TPS |
Most tables (VE, Spark, AFR) do not use TPS. They are scaled to MAP on the Y axis and RPM on the X axis. Unless you are running in Alpha-N mode as opposed to Speed Density (MAP-based) then these are the only two variables you need.
The only places where TPS is commonly used is in the Accel/Decel and Accel wizard screens (for TPS-based accel), in the OverRun screen (for minimum cutoff threshold) and in the various Boost Targets tables when EBC is used. |
hm, but when i insert any tps then i see the scale go up and down, otherwise it stays at 0, maybe the hole table have 0 on the X-Axis..
But this can be a missload from your msq? Maybe there are some erros when i load it on my European Standart Configuration. Btw.. i use now HighRes latest Version. |
# Connect to your MSP with MegaTune, from the Tools menu, choose 'Calibrate TPS'.
# With your foot OFF the throttle, click 'GET CURRENT' for the Closed Throttle ADC Count # Floor it and hold it there. Click 'GET CURRENT' for the Full Throttle ADC Count |
i did.. i did ( i have read the manual) , but this doesnt help, the tables will not updated.
my tps are from min 29 to max 191 |
29% to 191%?
or 29 ADC to 191 ADC? |
All times are GMT -4. The time now is 10:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands