MSII v3.0 build guide + mods for '91 1.6l..?
#1
Newb
Thread Starter
Join Date: Jul 2010
Location: Portsmouth, South coast, UK
Posts: 4
Total Cats: 0
MSII v3.0 build guide + mods for '91 1.6l..?
Firstly hello to miataturbo.net!
I have just started building a MSII v3.0 for my '91 1.6L mx5 and want to make sure I get everything built in the right order. I am following the megamanual guide which is great but it doesnt specifically say what things I should leave in or take out, so I wondered if there is a guide to the mods etc. on here?
I was told on the one of the UK forums that this is the place to look but so far I can only find info on the MSI....could someone point me in the right direction for MSII?
Thanks,
Ben
I have just started building a MSII v3.0 for my '91 1.6L mx5 and want to make sure I get everything built in the right order. I am following the megamanual guide which is great but it doesnt specifically say what things I should leave in or take out, so I wondered if there is a guide to the mods etc. on here?
I was told on the one of the UK forums that this is the place to look but so far I can only find info on the MSI....could someone point me in the right direction for MSII?
Thanks,
Ben
#2
Welcome!
You will want to take a look here: http://miataturbo.wikidot.com/MS2_a
Note that with the exception of the microcontroller (U1), all the components needed on the board for a Miata are the same for MS1 and MS2. It's just whatever mods you choose to install (fan relay, ign output, pwm idle control, etc.) are what will be a little different from the diagrams.
You will want to take a look here: http://miataturbo.wikidot.com/MS2_a
Note that with the exception of the microcontroller (U1), all the components needed on the board for a Miata are the same for MS1 and MS2. It's just whatever mods you choose to install (fan relay, ign output, pwm idle control, etc.) are what will be a little different from the diagrams.
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM