Trubokitty Boost Control and Launch control
 

Look, Im stumped. I followed Trubokitty's guide for my 1994 Miata, I used this pinout provided. How am I supposed to hook up Launch Control and a boost control?
https://cimg0.ibsrv.net/gimg/www.mia...a93611656a.png

wire input 2 IN to 1V (harness) and input 2 OUT to FLEX
wire Boost IN to PA0 and Boost OUT to 4O (harness)

Sorry, I wasnt clear enough. I meant after the ECU is assembled. ECU is in the car and im trying to install an EBC Solenoid and activate Launch control on the clutch switch. Where should I wire the EBC solenoid to and what do I need to wire to the clutch switch?

If input 2 is pinned out to the harness, does that necessarily mean no further soldering is required for the ECU to have the option to trigger launch control on the clutch switch?


EDIT: Wait this isnt correct

it's already connected to the clutch switch -- just turn it on in software.

EBC should be covered in the installation section. (it's connected to your MAF connector)

You made the guide idiot proof, and i still managed to fuck that up.

Thanks a bunch.