Upgrade MS1 to MS2 CPU
I understand some of the benefits of the MS2 over the MS1 CPU but am curious if it's worth the effort and what issues I may encounter.
Currently running MSnSE1 CPU with 029q IIRC and my i/o's should be the following: PWM IAC PWM Boost Control Shift Light Cooling Fan Tachometer 2 Spark outputs Launch Control Typical 2 inputs from CAS Things I would like to add: Second IAT sensor Speedometer Knock input A/C relay Meth injection based on boost/rpm/temp/whatever Believe I have completely exhausted the I/O's on the MS1 CPU and just want a few extras added along with the 16x16 tables. Anybody see issues I've overlooked? Don't have my diagram book in front of me at the moment so I can't verify for certain what is wired to where.. |
You may want MS3; it has dedicated water / meth injection control. MS2 doesn't have a larger number of outputs compared to MS1.
|
I thought about that Matt but I neglected to mention I have a v2.2 board. Is MS3 compatible with the v2.2?? Have tried to do some research on MS3 but the changes are a little overwhelming.
|
yes.
|
The biggest problem with MS3 on a V2.2 board is there's no off the shelf case, and the holes used for the standoffs to anchor the daughter card in place aren't there.
|
Thanks guys! After some more in depth RTFM I'll look into DIY's MS3/3.0 board and build anew. :D
|
All times are GMT -4. The time now is 06:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands