DIYPNP wbo2 wiring question (0v-5v) wire. 92 1.6
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2007
Location: Arvada, CO
Posts: 132
Total Cats: 2
DIYPNP wbo2 wiring question (0v-5v) wire. 92 1.6
I have a DIYPNP purchased off this site that I'm trying to connect a Innovate MTX-L wbo2 to. Car is 92 1.6 (non-turbo).
The 12v, ground, dimming (headlight 12v), and the brown simulated narrowband (to 2N/ pin 23 on DB-37) connections seem very straightforward.
My question is what to do with the 0v-5v (yellow) wire?
-Connect to MS at the same place as the narrowband (leaving the brown wire disconnected from the wbo2)?
If not this, my MS came with a db15 connector/hood and 6' of wire. Do I solder the wire to pin 15 and connect this to the 0v-5v yellow wbo2 wire?
Thank you!
Attached is a picture of the db15 connector parts/wiring for visual reference.
The 12v, ground, dimming (headlight 12v), and the brown simulated narrowband (to 2N/ pin 23 on DB-37) connections seem very straightforward.
My question is what to do with the 0v-5v (yellow) wire?
-Connect to MS at the same place as the narrowband (leaving the brown wire disconnected from the wbo2)?
If not this, my MS came with a db15 connector/hood and 6' of wire. Do I solder the wire to pin 15 and connect this to the 0v-5v yellow wbo2 wire?
Thank you!
Attached is a picture of the db15 connector parts/wiring for visual reference.
#2
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2007
Location: Arvada, CO
Posts: 132
Total Cats: 2
I went ahead and connected the yellow wire (0v-5v) from the wbo2 to the stock o2 wire and everything's reading fine in tunerstudio.
Not sure on purpose/function of the db15 connector, buuuuuut whatever.
Feel free to lock/delete the thread. I looked for a way to delete it but didn't find one.
¯\_(ツ)_/¯
Not sure on purpose/function of the db15 connector, buuuuuut whatever.
Feel free to lock/delete the thread. I looked for a way to delete it but didn't find one.
¯\_(ツ)_/¯
Thread
Thread Starter
Forum
Replies
Last Post
Vtpalom1
Miata parts for sale/trade
6
10-07-2015 11:54 PM
cschmelzer
DIY Turbo Discussion
3
10-05-2015 09:04 AM