whats better?
MS 1 V2.2 or V3 for a simple boost application around 5 -6psi goal is 200hp at crank. rather do i need the extras V3 has?
Ck. |
You don't technically need, for a basic setup, the extra stuff the v3.0 gives you.
You could easily make a v2.2 board have: ignition, fuel, fan, and launch control. Anything more, like adding the EBC will require creativity on your part. But most boards don't use half the features of a v3.0 board, like the VR circuit and PWM circuit, especially when using HR code. Therefore, if you're really looking to save some cash, it will save you a good $48. |
But would i be better off with V3?
|
You would be $48 poorer. Yes that is a word.
|
What model year?
|
Originally Posted by Braineack
(Post 524582)
What model year?
|
dont fuck with me.
get a DIYPNP unit. You'll need an MS-II to use your stock sensor and the diypnp couldn't be easier. |
Originally Posted by Braineack
(Post 524593)
dont fuck with me.
|
Originally Posted by Braineack
(Post 524593)
dont fuck with me.
I will fuck with you as much as I see fit. |
^gosped, I thought you were a mod now, anyway. No?
|
Originally Posted by webby459
(Post 524662)
^gosped, I thought you were a mod now, anyway. No?
I'm just playing with brainy. Hell, if he banned me I bet my grades would go up. This forum is too cool though. Where else can you backtalk to Admin and know they won't take it personally and PM you warning points. |
^i laughed a bit
Will i need the MS2 with the diypnp? (you kinda worded it like that, just making sure) |
Read, think, post...
The DIYPNP IS a MS2. (in fact a microsquirt aka MS2) |
^right.
I'm getting DIYPNP Nippon Denso 76pin Unassembled Kit I'll start building it maybe finish before springs end. going to take my time on it. |
Somehow :dunno: I fucked mines up "taking my time" If you can't crank it out in a few hours don't do it. But if you have skills, carry on.
|
I can design and print my own circuits, my soldering skills are well formed. I just don't like to rush. i took 3 days to build my MS1 for my old car.
|
Originally Posted by 00mx5se
(Post 525675)
I can design and print my own circuits, my soldering skills are well formed. I just don't like to rush. i took 3 days to build my MS1 for my old car.
|
Yeah I should be, i re-ask alot of questions I want to keep my car safe and any differences in cars/ecu i don't want to miss. so even if i know ill still ask.
|
Oh, well that's cool. Another strategy might be to share what you do know. This way people can either acknowledge your awareness or adjust it accordingly. Good luck with your build!
|
lol thanks
|
All times are GMT -4. The time now is 10:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands