Ralphnapierii

Hello, all.
Just, please a quick reality check on my maps. I'm aiming for a safe 7-8 psi at the moment, do my maps look terrible?

1991 1.6 with a turbo from lotus elan. Also running factory injectors at up to 155% load... is that alright?

Braineack

iTrader: (62)

kill your tq output, yes.

Ralphnapierii

Well, I understand I'm not getting all the potential power I can at this point, I'm just trying to have a map I can drive on without damaging the engine.
I have some idea of how to work afr targets and fuel maps, but I have zero experience with timing maps. I don't know what to listen for, look for or feel for.

I will get the car dyno tuned professionally as I get tax money, but until then, trying to not break anything. What kills the torque curve?

curly

iTrader: (25)

You're far below even "safe" he's saying.

Spark makes power, but yes, spark also kills motors.

You're not close to doing either.

aidandj

iTrader: (5)

Factory injectors might be an issue

curly

iTrader: (25)

Oh yeah, those are only good for 115 crank hp. You shouldn't be running them higher than 85%.

sixshooter

iTrader: (12)

Remove the wastegate actuator rod from the wastegate flapper lever.