Where to place AIT relative to WI?
1 Attachment(s)
As I reinstall the motor, I am moving the location of my water injection and adding an AIT sensor for the MS-II. My thought is to put both of them in the outlet tube of the intercooler. My question is which comes first, the chicken or the egg?
I am pretty sure I want the AIT at "C" in the attached picture. If the WI should be before it, do you think A or B? IF WI goes after should I still put AIT at C and water at D? Or would AIT at B and water at C or D be better? Any thoughts? |
It's been covered before an they can never come to an agreement on how far away the AIT should be, I'd personally put it closer to the TB.
|
It's on a supercharged car, so the intake flow is
Throttle body Supercharger intercooler intake manifold I thought I read somewhere that they didn't recommend putting the sensor directly in the manifold, so, the charge pipes are an option, but due to the layout maintenance/replacement would be much more difficult. |
I'd suggest not putting it too close to the butterfly valve, I originally had it there and had terrible heat-soak issues at idle, I moved it to a nice cool place after the IC and the heat-soak issue is gone.
|
I would probably put them as far apart as possible. That way the water would have time to evaporate before hitting the AIT sensor. So, WI at A and AIT at D. However, that is just one small part of the equation.
|
All times are GMT -4. The time now is 05:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands