wiring question
im working on a parallel installation of a ms1 on a 96 and i have a question on the wiring. On braineack's writeup he shows wiring going to the ms connector such as pin 29 and i was wondering where those are supposed to go causse they dont show up on the ecu pinout. Thank you
|
MS has a DB 37 connector. 37 pins, labeled 1-37. That's where those numbers come from.
|
i know that... its printed on the connector. Maybe i wasnt clear enough. I see some wiring on the writeup that doesnt have a place to go on his printout on the ecu. Pin 29 was an example of one of em.
|
Probably not used. Or you can set it to be an output to something. More info on wiring here:
Assembly Guide - MegaSquirt<sup>®</sup> V3.0 Main Board http://www.megamanual.com/ms2/v3ext_wiring.gif |
The pic of the DB37 on Brainey's writeup is just a generic pic from the MegaSquirt FAQ. It's not Miata-specific. You need to familiarize yourself with the function of all these wires so you know what you're hooking up. Check out the last page of the 3.0 schematic: V3 Main Board
From this, we see that pin 29 is "IAC2A", a fairly generic pin that just deadends at a pad inside the MS. So unless you've internally connected a mod to pad IAC2A, this pin does nothing and goes nowhere. |
All times are GMT -4. The time now is 02:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands