First Run with Devil's Own Alcohol injection kit (stupidcharged @ 8psi)
#1
Junior Member
Thread Starter
iTrader: (-1)
Join Date: Nov 2013
Location: GA
Posts: 171
Total Cats: -156
First Run with Devil's Own Alcohol injection kit (stupidcharged @ 8psi)
Sorry for the noob post, was in a hurry and was loosing daylight.
I'm running prestone -27* windshield washer fluid and just that. I was confused as to what to add to it due to all of the different threads on people running different mixtures.
Anybody know when would be a good pressure to start spraying the stuff? my pressure switch is a rising rate and is adjustable from 2-10 psi.
My setup makes 8psi , its a stupid charger so i see instant boost @ 3900 rpms and up if im over 50% throttle
I was actually getting knock @ max boost, and im wondering if it was due to too much spraying. I had the switch turned all the way down to 2psi and >up so it could have been that by the time i was at 7-8psi i was getting way too much meth/water
I'm running prestone -27* windshield washer fluid and just that. I was confused as to what to add to it due to all of the different threads on people running different mixtures.
Anybody know when would be a good pressure to start spraying the stuff? my pressure switch is a rising rate and is adjustable from 2-10 psi.
My setup makes 8psi , its a stupid charger so i see instant boost @ 3900 rpms and up if im over 50% throttle
I was actually getting knock @ max boost, and im wondering if it was due to too much spraying. I had the switch turned all the way down to 2psi and >up so it could have been that by the time i was at 7-8psi i was getting way too much meth/water
Last edited by zacktrotter_uncc; 10-20-2014 at 01:09 PM.
#4
Junior Member
Thread Starter
iTrader: (-1)
Join Date: Nov 2013
Location: GA
Posts: 171
Total Cats: -156
My nozzle is mounted horizontal in a hole in my throttle. the hole is deeper than the nozzle is long, leaving an area were the particles can bounce back and make big drops. (the pattern of the mist is kind of un-even)
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM