elektron

Please is it possible to control water injection nozzle with PC PRO card? (it was running 5th injector called e-cool before)
I need to drive one 200cc WI nozzle (throttle body pre-supercharger position) or 2 100cc nozzles (location of first nozzle in pre-supercharger position,and 2nd one in the intake manifold)

Techsalvager

you would need a water pump to do it but I don't see why you couldn't make use of it to inject water instead of gas, when does it start injecting gas with the e-cool?

Faeflora

iTrader: (2)

You could also use a fuel pump and real injectors. You would need a FPR and a mini fuel rail but I think that method is potentially superior to a water pump and high speed valve etc. If I redid my WI setup that's what I would do.

I think the pc pro might be perfect for this. Fuick yeah.

elektron

I would like to install megasquirt ms2 to my coldside mp62 supercharger miata. I would like to exchange 5 th injector called e-cool with little 100 cc WI nozzle and install another little WI nozzle pre-blower, directly to the throttle body. And I will not need my 3 pc pro cards anymore, so I was thinking ,if it is possible to control WI nozzles with this card (card is vacuum controled from intake manifold). Of course I know that I will need water pump and small nozzles.

richyvrlimited

iTrader: (1)

Might be a lot cheaper to sell the PC-Cards and use the money to buy a proper WI kit?

FYI my car is now converted to a FFS coldside manifold and I just need to hook my Aquamist up to get the water flowing.

Is a 200cc nozzle enough water?

elektron

Maybe yes ,but I didnt find kit with only 100-200cc nozzle/s,or there is no specifications about nozzle dimensions (snow performance...) I havent got any knowledges with WI kits,have you got any idea? If it is better way to go pre-blower nozzle located in the throttle body ,or directly to to intake manifold exchange for 5th injector... (I will use 4x305cc light green supra injectors - 4x305=1220 thats 120cc nozzle for WI)