Nozzle size conversion??
 

Hey guys, Looking to add WI to my E-cool and the IM comes tapped 8mm for Aquamist$$$$$. OK, I am willing to spend $20 for an Aquamist nozzle rather than buy a drill and tap kit or run the manifold down to a machine shop to have it altered. Soooo since 3gph seems to be the ticket what would be the equivilant size (.4mm, .8mm) or the equivilant flow cc/min in the Aquamist chart? Thanks guys for all the PM help you've given recently. Looking forward to great results burning water.

Well 3.4 liters in a gallon 60 minutes in an hour you can do the math fairly easily. Just make sure to reference the relative pump pressure they test it with. IE 60 psi flows alot different than 140 psi..

well, it's 3.4 litres in a gallon :p ...... but for those who suck at math use this calculator http://www.onlineconversion.com/flow_rate_volume.htm so that makes it 189.270 cc/min. Now I have to find Aquamist's calculation pressure. Hmmmmm

There yah go :D