WI setups and impressions
2 Attachment(s)
I thought that we should make a thread about the WI setups that we are running currently and allow people to see what the advantages to running WI. I will start, I am currently running the basic Devil's own kit from WOT's group buy. I am only at a bout 5.5psig right now on my greddy setup, and the WI is keeping the intake temps less than ambient. I have my timing set to 12 btdc as a baseline, and am pulling only 1 degree except for one spot, 3500 rpm's. I got some movement of the oil pressure gage, so I backed it down. The car at only this low boost feels just crazy. :cool:
Shit forgot pictures |
i am running the snow performance base universal kit, at 12-13 psig with no IC or aux timming control and base timming set at 10 btdc. Feels great. :bigtu:
|
Boostinsteve, glad you like it. Thanks for posting pictures.
|
Even though I got in on the group buy the other day I have not installed the system due to some wiring meltdown. The dash is off the car and it will probably be 3 months before I get everything back together and have the new Devil's Own WI running.
Hopefully my old setup info from when I was running a SuperCharger will give somone some tips on DIY. If not, oh well, it's the best I can do right now <G>: http://ww2.lightweightmiata.com:8080/water/water.htm |
Soon as I get my shiny brass checkvalve I can add my .02. Rest of the system is in and running.
|
running the DO, not terribly impressed :o
|
This thing is nuts!!!!!
|
Originally Posted by Philip
(Post 62169)
running the DO, not terribly impressed :o
|
Originally Posted by devilsown
(Post 62612)
:( You running any software to montor Ait or knock? Usually most people can feel the kit worken. Might want to double check it to see if its spraying.
the ECU handles the KR. |
I think with the nature of the Procharger that a controller or maybe just a higher activation point would help. I could also send you out a 10 Gph nozzle to see if that helps.
|
it's already clicking in at 3000 RPM.
I'm probably going to sell the car anyway so I'm not too worried about it. |
Originally Posted by Philip
(Post 62638)
I'm probably going to sell the car anyway so I'm not too worried about it.
|
Originally Posted by olderguy
(Post 62639)
Gonna get an M1A1 this time?
Once the 4.5L stroker is in the jeep and broken in I'll probably toss it on ebay. |
Originally Posted by Wideopentuning
(Post 62641)
Shit. That means Andy or Mark have the fastest car on the forum?
|
this thread seems to have gone off topic.
please continue with your results and write-ups from the DO WI kit. I am watching with interest. However from the link ealier in the post if your making less power then surely WI is crap? |
Cleaned it up.:)
|
I did an install today on an Supercharged 3.4 Tacoma TRD. Devils Own Basic Kit spraying a 5 gph nozzle through the MP62 Blower making 6 psi.. I will report back with an impression from the owner.
http://i6.photobucket.com/albums/y22...Install001.jpg http://i6.photobucket.com/albums/y22...Install009.jpg http://i6.photobucket.com/albums/y22...Install010.jpg http://i6.photobucket.com/albums/y22...Install011.jpg http://i6.photobucket.com/albums/y22...Install005.jpg http://i6.photobucket.com/albums/y22...Install017.jpg http://i6.photobucket.com/albums/y22...Install018.jpg |
All times are GMT -4. The time now is 11:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands