550cc high imp RX7 Injectors
03-06-2010, 01:41 PM
#1
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
550cc high imp RX7 Injectors
These are for sale by me.
(2) 195500-1370
From witchhunter:
Where I bought:
Mazda RX7 87-88 13BT 550cc TURBO injectors 195500-1370 : eBay Motors (item 140370144730 end time Feb-15-10 07:45:44 PST)
(2) 195500-2020 - Completely PnP
From witchhunter:
Where I bought:
MAZDA RX7 TII (1986-1991) INJECTORS : eBay Motors (item 180466771039 end time Feb-14-10 11:15:59 PST)
All of them are high impedance/resistance, electrically plug and play.
They are a mixed set, as I scored two seperate deals (watched for months). Two stock style plugs, two rectangular plugs, but will behave the same with MS. I'll include the two clips you need.
If they don't have the o-rings or rubber bottom insulators on them I can send some new ones I just got anticipating install.
I had bought them expecting to step up to a higher power goal...but after my motor bit the dust I don't want to swap another one. I already sold my forged rods...so can't shoot for over 250whp anymore, and therefore don't need anything bigger than 460cc.
$90 shipped OBO
If you just want the 2020 PnPs and want to source the other two on your own I can part out, but would prefer to make a deal on all four. $55 for those, and $45 for the other set.
Please feel free to send offers, trades or whatever, but please don't make baby Jesus cry with ridiculous lowballs. We just put him down for a nap in his little tuxedo t-shirt...and he's just so precious laying there, so cuddly, yet so omnipotent.
Eh...nevermind, just want them gone, shoot me a lowball for all four.
(2) 195500-1370
From witchhunter:
Where I bought:
Mazda RX7 87-88 13BT 550cc TURBO injectors 195500-1370 : eBay Motors (item 140370144730 end time Feb-15-10 07:45:44 PST)
(2) 195500-2020 - Completely PnP
From witchhunter:
Where I bought:
MAZDA RX7 TII (1986-1991) INJECTORS : eBay Motors (item 180466771039 end time Feb-14-10 11:15:59 PST)
All of them are high impedance/resistance, electrically plug and play.
They are a mixed set, as I scored two seperate deals (watched for months). Two stock style plugs, two rectangular plugs, but will behave the same with MS. I'll include the two clips you need.
If they don't have the o-rings or rubber bottom insulators on them I can send some new ones I just got anticipating install.
I had bought them expecting to step up to a higher power goal...but after my motor bit the dust I don't want to swap another one. I already sold my forged rods...so can't shoot for over 250whp anymore, and therefore don't need anything bigger than 460cc.
$90 shipped OBO
If you just want the 2020 PnPs and want to source the other two on your own I can part out, but would prefer to make a deal on all four. $55 for those, and $45 for the other set.
Please feel free to send offers, trades or whatever, but please don't make baby Jesus cry with ridiculous lowballs. We just put him down for a nap in his little tuxedo t-shirt...and he's just so precious laying there, so cuddly, yet so omnipotent.
Eh...nevermind, just want them gone, shoot me a lowball for all four.
Last edited by gospeed81; 03-06-2010 at 02:58 PM.
Reply
0
0
04-05-2010, 06:38 PM
#6
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Bump...need these sold.
Had them in my car for a few weeks. Ran, but kind of rough. Not sure how much of it was my tune since it was only idle and cruise that were a little lurchy (accel enrichments maybe), but it ran well with more throttle, and no det in boost.
I recommend cleaning them, and it may be a good idea to put a 1.2ohm resistor on the two 1370s.
Will provide clips for all four.
Will sell in pairs. I see the 2020s and 1370s come up in pair on eBay a lot, so if you catch a deal I'll help you complete the set.
The 1370s have new isolators, and I have some other spacers and isolators I can include.
Had them in my car for a few weeks. Ran, but kind of rough. Not sure how much of it was my tune since it was only idle and cruise that were a little lurchy (accel enrichments maybe), but it ran well with more throttle, and no det in boost.
I recommend cleaning them, and it may be a good idea to put a 1.2ohm resistor on the two 1370s.
Will provide clips for all four.
Will sell in pairs. I see the 2020s and 1370s come up in pair on eBay a lot, so if you catch a deal I'll help you complete the set.
The 1370s have new isolators, and I have some other spacers and isolators I can include.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
