**TURBO BUILD PART OUT**: Charlotte, NC
10 Attachment(s)
Im posting this for a friend (Brad "na3turbo") who mostly reads information here and doesn't have enough posts to make his own thread. Any replies will be answered ASAP and will be forwarded to my friend. I can have people to vouch for me on this forum also. Here goes:
I have decided to part out my 93' miata that i began building in preparation for lot of boost, however the time has come to sell it all off. Located in Charlotte, NC. ( i know im going to regret this):td: Here Goes... (it'll only allow me 10 pictures so pm me for others. ill send them if i have them) NOTE:THE ROLLING CHASIS WILL BE FOR SALE AS WELL BUT I DO NOT HAVE ANY PICTURES UNTIL THE WEEKEND. IF YOUR INTERESTED PM ME FOR DETAILS. 1.6L shortblock- $4500 picked up $4700 with head and all listed parts below comes with all of the following already assembled and ready to go -Wiseco pistons 8.5:1 -Carrillo H-beam rods -Calico Coated OEM rod and main bearings -ARP head and main studs/bolts -Cometic triple layer headgasket -Gates Racing timing belt -New OEM oil pump -Bill Wilners Billet Oil pump gears -New OEM waterpump, tensioner, idler pulley -New OEM Mazda oil filter -New OEM gasket kit -Powdercoated oil pan(chrome color) -Bored .040 over and honed with a torque plate -Decked .007 -Debured -Balanced/blueprinted -Polished/lightened crank -Alternator -Starter -Alternator belt -Oil pressure sensor -Powdercoated chrome intake manifold brace -Powdercoated chrome water outlets/inlets Attachment 216126 Attachment 216127 Attachment 216128 Attachment 216129 1.6L Head (no valves/springs/retainers)$300obo picked up comes with all of the following -New Hydraulic Lash Adjusters (never installed) -OEM cams/ gears(used) -Valvecover powdercoated military green -Ignition coils with NGK wires(used) -Cam angle sensor(used) -Intake manifold -Powdercoated chrome water necks(both the one on the front and rear of head) -related sensors -throttlebody( and related parts) -all plastic covers/bolts Attachment 216130 Attachment 216131 Attachment 216132 NOTE: HEAD WILL BE SOLD WITH SHORT BLOCK FOR $200 Willis Machine Custom Fuel rail- $200 shipped Made out of solid aluminum. Has threaded 3/8 ends for AN- or standard fittings. Fits 1.6L manifolds only. Powdercoated green metallic Attachment 216133 Attachment 216134 Apexi AVC-R- $425 shipped Best electronic boost controller i think i've ever used. installed it to use for about a week then tore the car apart. all wiring/original box/diagrams/parts included. Flyin Miata Link ECU - $1250 shipped Includes the following Link keypad(not pictured) Map sensor and wiring knock sensor IAC sensor ECU and Ribbon Instruction/tuning manuals Attachment 216135 Walbro 255lph inline fuel pump with install kit (brand new) -$100 shipped OEM non molested radio surround - $80 shipped Suspension Techniques front sway bar with new bushings/hardwre $150 +shipping picture comming this weekend 10 gallon aluminum fuel cell $220 shipped features built in sump foam x2 8-AN fittings in sump x2 6-AN relife fittings on top side sorry no picture until the weekend HKS SSQV BOV- $100 shipped~~Sold~~ authentic with purple insert 5 speed tranny, no shifter shifts smooth 105K miles $250 picked up. HKS Turbo Timer- $50 shipped ~~Pending~~ PM ME WITH ANY QUESTIONS. I can get pictures of all receipts. http://s42.photobucket.com/albums/e302/Mrdriftr/ more pictures here. -Nick |
Bov
Interested in the HKS SSQV BOV. I can't send PM so send me an email at
l3shik@yahoo.ca for arrangements. Thanks |
just saw this on miata.net...
expensive as hell but pretty. |
this is upsetting, I was really looking forward to seeing the car finished
|
I'm not positive but it seems like this guy is asking way too much for his stuff, you might want to recommend he lower his price if he wants to sell quickly
|
All requests will be answered tomorrow.
slutz4: im a little bit disappointed also but he has something else up his sleeve. :rly: greenday: Its actually around ball park, a bit cheaper compared to a build from FM plus he has the receipts to back them up. But by all means, the prices are OBO :bigtu: |
BOV sold and turbo timer is pending.
|
Thanks Nick for posting this for me.
As you guys say, the prices are listed high, but they are what you would pay if purchased through a shop(new items). I am open to any reasonable offer on anything. Thanks for looking, Brad |
Block NOT pending sale
Who the fcuk would of thought that there were scammers lurking this board :td: Must be iluvtreunos friends |
Things for sell, taking up space
|
So prices are being reduced as to get this stuff outta here. here's the new pricing for you guys, since i've just been involved in some sort of scam with another idiot. My email is Bradss61088@gmail.com
Built Block-$3000picked up Head and related parts-$150 prefer pickup Link ECU- $900shipped Apexi AVCR- $300 shipped HKS Turbo timer- $50 shipped Custom fuel rail- $100 shipped Walbro fuel pump- $75shipped Suspension Techniques Front Sway with bushings- $100shipped OEM radio surround with buttons and eyeballs- $50 shipped 5 speed tranny, no shifter 105k miles- $200picked up 10 gallon fuel cell- $150shipped thanks guys, brad |
sucks about the plans changing, would you sell the rods and oil pumpgears seperate maybe you might get more takers :dunno: how much for the intake manifold?
|
sorry, im not ripping the block apart. i've had a few interested buyers, and a scammer for it already so hopefully it'll sell as a whole eventually. just the intake manifold? or do you want the TB and all the other stuff to?
$40 for Intake Mani alone $60 for Mani and TB |
must sell this stuff, make offers! :-D thanks!
|
bah!
shortblock and link ecu on ebay... bid away. prices posted here will be honored to board members. Link ECU: http://cgi.ebay.com/ebaymotors/ws/eB...158499894&rd=1 Block: http://cgi.ebay.com/ebaymotors/ws/eB...158503299&rd=1 |
All times are GMT -4. The time now is 03:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands