[AZ] 4.10 Torsen T1, plus entire rear suspension
14 Attachment(s)
I have a full 4.10 Torsen rear end out of my '94. I'd like to sell everything as a complete package, but will split up with interest. The whole package would include an NA subframe, NA subframe brace (ladder bars), upper and lower control arms, both uprights with hubs, the differential, two piece CV axles, and the driveshaft, plus all assorted nuts and bolts. Can ship bolted and torqued together, ready to install.
Parts came from a 94. Differential may not be original unit, but car has 180k on the odo. Drove well and was easy to align to specs. Diff has M1 75w90 as fill. I currently have the differential bushings pressed out. I could press in the used OEM bushings I have, or I could source and install polyurethane for a little extra. I could even install a full set of poly bushings, with grease zerks, for more. Pics will be up on Saturday. Will show inside of diff with stub flange removed for Torsen proof. Will ship at buyer's expense, will be cheaper if I can ship to a place with a loading dock, as lift-gate service isn't cheap and they're pretty finicky about the delivery time. I was thinking $1500 for everything, but if that sounds too high, shoot me an offer. It'd be $60 for poly diff bushings installed, and $200 to put poly bushings and zerks in the control arms. Would be interested in partial trade for MS3, NA Bilstein HD adjustable coilovers, Roll bar (Pref Boss Frog Dual), Elise seats/race seats, a SuperMiata driveshaft, or 15x8's in a non-CR offset. https://www.miataturbo.net/attachmen...ine=1400372470 https://www.miataturbo.net/attachmen...ine=1400372470 https://www.miataturbo.net/attachmen...ine=1400372470 https://www.miataturbo.net/attachmen...ine=1400372470 https://www.miataturbo.net/attachmen...ine=1400372470 https://www.miataturbo.net/attachmen...ine=1400372470 https://www.miataturbo.net/attachmen...ine=1400372470 Edit: Alright, I'm going to list interest for parts for breaking this up. It'd make a great upgrade for anyone with a 1.6 car, as you'd get the Torsen, axles and uprights (will not attempt separation), driveshaft, subframe and subframe brace. Plus some unbent control arms if you want to put in poly bushings and not have to have the car inoperational and bolt the whole unit in. Diff: No Interest Axles & Uprights: No Interest Driveshaft: No Interest Control Arms: No Interest Subframe: No Interest Subframe Brace: No Interest The various parts will come with their hardware. Edit 2: Rough weights for everything Differential: 75 lbs Axles & Uprights : 50 lbs Driveshaft: 11 lbs 40" long oversize Control Arms: 25lbs Subframe: 30-40 lbs, including brace I should be able to fit the entire assembly, assembled, on a single pallet. 40"x48"x24" @ 200lbs. Also, as I said above, liftgate service is expensive! If you can pick the item up at your local freight terminal or have it delivered to a business with a loading dock it will save a LOT of money on shipping. |
your diff swap
I recently shredded my 1.6 torsen and your swap sound perfect! I just have to figure out things with the bank
|
Bump for pics
|
just need the lsd if u are going to part out let me
|
PM'd
|
Bump! Not a lot of interest in parting. Someone is very loosely in line on the diff. Will consider offers, and would love to have someone pick this up!
|
Bump. Never heard back from anyone, so listing everything as "no interest."
Don't be fooled, these parts are merely covered in a fine layer of Arizona rustproofing aka dirt. I was going to take them to the pressure washer and take more pictures, but it was too hot outside. |
I'm interested, shoot me a text 845 559 7181
I may have some speed parts you may be interested in as well. |
Bump. I could probably ship it anywhere for $300, but I'd have to double check to be 100% sure.
|
Bump. Make me an offer. I know the price is high. Let's make a deal!
Considering parting out offers. |
Bump! $1500 shipped for everything. Accepting offers on parts.
|
Bump! Will part out! Please make me an offer, I need some monies to fix mah car!
|
Interested in the diff, axles and driveshaft, can you email me at sinisa-10@hotmail.com.
|
Interested in the diff alone. Please e-maiil at: deadohiosky1984@yahoo.com.
Have a set of Koni Yellows with RB springs if you're interested. |
Bump for parting out prices. Unfortunately I can not ship to Canada, but I can ship to a receiver somewhere near the border if you can make arrangements. Prices do not include shipping!
Differential - $600 Axles and Uprights - $150 Upper Control Arm - $50 Lower Control Arm - $75 Driveshaft - $100 Subframe and Brace - $100 Make me an offer! |
Someone make me an offer on this stuff!
|
do you still have some left? i really want it
|
All times are GMT -4. The time now is 11:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands