Winter build break - FM DP, FM Exhaust, Link IM, etc
01-24-2016, 09:15 PM
#1
Junior Member
Thread Starter
iTrader: (4)
Join Date: Oct 2006
Location: Hagerstown, MD
Posts: 229
Total Cats: 39
Winter build break - Intake Manifold set up for additional injectors, 949 Valve Stems
$150 Modified intake manifold to support NB Link ECU fuel on an additional rail. 300cc injectors installed. Comes with or without upper manifold, you decide.
Some other references to this setup:
https://www.miataturbo.net/miata-par...s-legal-79868/
https://www.miataturbo.net/general-m...anifold-67103/ - This is actually the previous owner of this car/setup
$10 shipped Badges. Minor pitting on the MAZDA badge.
$10 shipped 4 Black 949racing valve stems. Logos are perfect
PMs are fine, but the quickest way to reach me is via text @ 301-873-6653
-----
Sold Items
SOLD - $160 shipped - Old style upper and lower downpipe with o2 sensor bung. The upper and lower are connected by 11mm bolts that secure a bridge in between. From what I understand, the upper portion of the original FM downpipe had issues with cracking in the location that this has been repaired. I havent had any issues during my time of ownership.
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
SOLD - $125+shipping - FM midpipe with resonator and cat. This is a 2.5" pipe from an NB that has an added hanger for NA fitment. I would recommend an NA owner not purchase this. It doesn't fit well and rattles over the slightest of bumps. This fitment issue is the main reason I'm replacing the entire exhaust. An NB owner would want to cut off the hanger with the fuel line on it. Shipping this could be a problem with the size, so I may need some time to figure that out when/if this sells.
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
SOLD - $50 shipped - GT2560R Inlet Housing machined for FM intercooler pipes.
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
SOLD - $40 shipped Center caps
SOLD - $25 shipped 2.5 Left exit exhaust. Not much to say about this. Delete your muffler! 2.5
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
Some other references to this setup:
https://www.miataturbo.net/miata-par...s-legal-79868/
https://www.miataturbo.net/general-m...anifold-67103/ - This is actually the previous owner of this car/setup
$10 shipped Badges. Minor pitting on the MAZDA badge.
$10 shipped 4 Black 949racing valve stems. Logos are perfect
PMs are fine, but the quickest way to reach me is via text @ 301-873-6653
-----
Sold Items
SOLD - $160 shipped - Old style upper and lower downpipe with o2 sensor bung. The upper and lower are connected by 11mm bolts that secure a bridge in between. From what I understand, the upper portion of the original FM downpipe had issues with cracking in the location that this has been repaired. I havent had any issues during my time of ownership.
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
SOLD - $125+shipping - FM midpipe with resonator and cat. This is a 2.5" pipe from an NB that has an added hanger for NA fitment. I would recommend an NA owner not purchase this. It doesn't fit well and rattles over the slightest of bumps. This fitment issue is the main reason I'm replacing the entire exhaust. An NB owner would want to cut off the hanger with the fuel line on it. Shipping this could be a problem with the size, so I may need some time to figure that out when/if this sells.
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
SOLD - $50 shipped - GT2560R Inlet Housing machined for FM intercooler pipes.
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
SOLD - $40 shipped Center caps
SOLD - $25 shipped 2.5 Left exit exhaust. Not much to say about this. Delete your muffler! 2.5
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
https://www.miataturbo.net/attachmen...ine=1453688131
Last edited by Shibby; 02-07-2016 at 12:42 AM.
Reply
0
0
01-24-2016, 10:56 PM
#4
Junior Member
Thread Starter
iTrader: (4)
Join Date: Oct 2006
Location: Hagerstown, MD
Posts: 229
Total Cats: 39
I'll reach out to you tomorrow to work out a deal/shipping. Anyone have ideas on sourcing a box for this? Storage facilities?
Reply
0
0
01-24-2016, 11:15 PM
#5
Elite Member
iTrader: (1)
Join Date: Mar 2014
Location: Jacksonville, FL
Posts: 1,552
Total Cats: 196
ok.
how long is the midpipe?
what i usually do for long items, is take 2-3 normal boxes, cut off the end and stuff one box into the next and then use LOTS of tape to hold them all together.
you can find 24x12x12 boxes easily, so if you combine 2-3 of them they will be long enough.
uhaul might have odd shaped boxes too.
anyway, let me know, i can also use my UPS account to cover the shipping, it will be cheaper for me this way.
how long is the midpipe?
what i usually do for long items, is take 2-3 normal boxes, cut off the end and stuff one box into the next and then use LOTS of tape to hold them all together.
you can find 24x12x12 boxes easily, so if you combine 2-3 of them they will be long enough.
uhaul might have odd shaped boxes too.
anyway, let me know, i can also use my UPS account to cover the shipping, it will be cheaper for me this way.
Reply
0
0
01-25-2016, 07:07 AM
#8
Junior Member
Thread Starter
iTrader: (4)
Join Date: Oct 2006
Location: Hagerstown, MD
Posts: 229
Total Cats: 39
You're second in line for the DP. I have a text from a 951 area code that will be third in line. Thank you both for the interest.
The midpipe is ~70" long. I should be able to combine three boxes to ship, but I may end up having to cut the extra hanger off to fit within the 12" side. Okay with you?
I'll work on getting it packed up today. Shoot me a text @ 301-873-6653 and I'll work with you on the UPS avenue.
ok.
how long is the midpipe?
what i usually do for long items, is take 2-3 normal boxes, cut off the end and stuff one box into the next and then use LOTS of tape to hold them all together.
you can find 24x12x12 boxes easily, so if you combine 2-3 of them they will be long enough.
uhaul might have odd shaped boxes too.
anyway, let me know, i can also use my UPS account to cover the shipping, it will be cheaper for me this way.
how long is the midpipe?
what i usually do for long items, is take 2-3 normal boxes, cut off the end and stuff one box into the next and then use LOTS of tape to hold them all together.
you can find 24x12x12 boxes easily, so if you combine 2-3 of them they will be long enough.
uhaul might have odd shaped boxes too.
anyway, let me know, i can also use my UPS account to cover the shipping, it will be cheaper for me this way.
I'll work on getting it packed up today. Shoot me a text @ 301-873-6653 and I'll work with you on the UPS avenue.
Reply
0
0
01-26-2016, 08:45 AM
#12
Junior Member
Thread Starter
iTrader: (4)
Join Date: Oct 2006
Location: Hagerstown, MD
Posts: 229
Total Cats: 39
Downpipe and midpipe sold and shipped. Pleasure working with you, borka!
I have someone interested in the turbo housing, so I'll consider that spoken for now.
Edit: Compressor housing and center caps are sold.
I have someone interested in the turbo housing, so I'll consider that spoken for now.
Edit: Compressor housing and center caps are sold.
Last edited by Shibby; 01-26-2016 at 12:31 PM.
Reply
0
0
01-27-2016, 09:20 AM
#13
Junior Member
Thread Starter
iTrader: (4)
Join Date: Oct 2006
Location: Hagerstown, MD
Posts: 229
Total Cats: 39
Taking offers on everything left. Here's a picture of the turbo parts.
I don't know what could be done with the CHRA housing since no one recommends rebuilding them. The hotside could be coated though. 2 broken studs included!
I don't know what could be done with the CHRA housing since no one recommends rebuilding them. The hotside could be coated though. 2 broken studs included!
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Kinavo
Miata parts for sale/trade
13
01-19-2016 09:27 PM
johnp2
Miata parts for sale/trade
10
01-18-2016 10:09 PM
