FS: Mani/downpipe/turbo/exhaust combo CHEAP
#1
Senior Member
Thread Starter
iTrader: (6)
Join Date: May 2009
Location: San Francisco
Posts: 983
Total Cats: 23
FS: Mani/downpipe/turbo/exhaust combo CHEAP
so i have decided to redo my setup with a much nicer tubular manifold and 3 inch downpipe and exhaust, so this is all my old stuff up for sale. It is still on the car, and i'm still working on the new manifold. So I will be able to ship it as soon as i finish my new manifold, 1-2 weeks tops. The setup:
Manifold:
just a custom made log manifold, looks kinda ugly on the outside, i spent hours smoothing the inside with a die grinder. It did crack where the fourth runner connected to the third because i had ground the welds too thin, but I drilled and welded up the crack with a very solid weld. If any more cracks appear in the future, i will re-weld them for free.
Turbo:
I am including a brand new chinacharger turbo off ebay, a t3/t4 .60 ar.
it is this exact turbo.
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_4570wt_762
It is brand new in the packaging still. Im including it because i know this exact turbo is what fits with the mani and downpipe.
In order for this to fit, you WILL NEED TO FLIP AROUND THE MIXING MANIFOLD!! this is very easy to do, and took me less than an hour to re-route all the hoses. this stup WILL NOT FIT with ac or power steering.
Downpipe/Exhaust:
full 2.5 inch downpipe and exhaust, v band connects to the turbo, then two other connections in the exhaust using two bolt flanges, with gaskets included. and has o2 bung at bottom of downpipe. Exhaust sounds AWESOME. as you can see, the muffler location will work only if you have cut the rear bumper. comes with all the necessary clamps.
So, to repeat the important parts, manifold cracked but was fixed, no exhaust leaks whatsoever, need to flip mixing manifold, and will not work with ps or ac.
I'm thinking 700 sounds like a pretty good deal for an entire hot side, i really want to keep the whole thing together so that i know it will fit, but if someone already has a turbo they think will fit ill sell the setup without turbo.
$700
Thanks,
Evan Witty
Manifold:
just a custom made log manifold, looks kinda ugly on the outside, i spent hours smoothing the inside with a die grinder. It did crack where the fourth runner connected to the third because i had ground the welds too thin, but I drilled and welded up the crack with a very solid weld. If any more cracks appear in the future, i will re-weld them for free.
Turbo:
I am including a brand new chinacharger turbo off ebay, a t3/t4 .60 ar.
it is this exact turbo.
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_4570wt_762
It is brand new in the packaging still. Im including it because i know this exact turbo is what fits with the mani and downpipe.
In order for this to fit, you WILL NEED TO FLIP AROUND THE MIXING MANIFOLD!! this is very easy to do, and took me less than an hour to re-route all the hoses. this stup WILL NOT FIT with ac or power steering.
Downpipe/Exhaust:
full 2.5 inch downpipe and exhaust, v band connects to the turbo, then two other connections in the exhaust using two bolt flanges, with gaskets included. and has o2 bung at bottom of downpipe. Exhaust sounds AWESOME. as you can see, the muffler location will work only if you have cut the rear bumper. comes with all the necessary clamps.
So, to repeat the important parts, manifold cracked but was fixed, no exhaust leaks whatsoever, need to flip mixing manifold, and will not work with ps or ac.
I'm thinking 700 sounds like a pretty good deal for an entire hot side, i really want to keep the whole thing together so that i know it will fit, but if someone already has a turbo they think will fit ill sell the setup without turbo.
$700
Thanks,
Evan Witty
Last edited by wittyworks; 08-05-2010 at 07:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM