gospeed81 EPIC part-out
#1
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
gospeed81 EPIC part-out
I'm stepping back from this for a while guys. I've been chasing a goal for this car that I can't achieve with the time, money and energy I've got. I'm considering leaving the car as-is, but I'd prefer to make it a good DD, and buy another toy that's less of a project. I love the project, but need to do it later when I'm not spread so thin between work, school and family.
I'm going to be tearing down a year's worth of work. I'm definitely flexible, so if you're the least bit interested in anything, PM me an offer.
Everything purposely overpriced, because let's face it, you guys are lowballers.
BEGi System4.1 IHI Turbo kit - 1.6L
-intercooler and piping, from outlet to intake
-(1) VC47 Turbo, 3991 Compressor - This turbo has off idle boost, and holds 12psi to redline
-(2) VJ17 turbos, 4219 compressor, one in great shape, one rebuildable, all fittings - similar spool, but much more airflow, 16psi to redline
-BEGi cast mani
-BEGi seperated gases downpipe
-oil feed and drain
-heat shield
-airbox with MAF flange if needed
-2.5" K&N filter
-BEGi boost gauge
SOLD
PWR Aluminum Radiator
SOLD
FM clone frame rails
SOLD
Panasport 14x6 w/new Falken 912s, or without tires
-low miles on tires
-come with McGard spline drive lugs and key since you can barely get on stock lugnuts with these wheels
-Wheel finish isn't perfect, but wheels have very little curbage. One lip is polished, and I can do the others as well, as well as refinishing wheels in graphite.
-Only have two center caps, and one of those is cracked. Was going to make covers from hole plugs.
$375 + shipping
Also have added (see later pages):
Eibach 2.5" ID 200lb/in springs
Delrin diff mounts
Arkmage Intercooler w/piping
Dynomax 2.5" straight-thru muffler, 14" body, center offset
FM 2.5" dual exhaust
frankenstein T3 downpipe
(2) rebuildable motors
(1) Rosenthal rebuild kit and RockAuto bearings, ringset
Thanks guys, will still hang out for technical discourse, but need to focus on more important things right now.
EDIT: Car is parked and everything is being uninstalled today. Let me know what you want.
TERMS:
Please read!
Please PM me if you are interested. Feel free to post any questions, or express interest publicly if you wish, but I will respond to PMs first. I will update status of deals in the thread when I am able.
I will try and give buyers reasonable time to submit payment once a dealed is agreed to, in completion, by both parties. I will run for the hills screaming and sell to someone else if I feel that you may flake, change your mind, just aren't sure what you want, or continue to stall. If a deal is reached with another party during this time I will do my best to notify you immediately.
Shipping assumes lower 48, continental US.
Absolutely no returns or refunds. Insurance above standard carrier coverage (eg: UPS covers $100 value) is on your dime.
I reserve the right to refuse sale to anyone based on feedback, correspondence (including deal planning), or my preference of who to deal with in the instance of multiple interested parties. Also, once the part has been paid for the part is considered sold, regardless of what type of deal we were working on. Part WILL NOT be marked as sold until it is actually paid for.
I also reserve the right to remove item from sale as I wish, should I not need to liquidate it anymore.
Please remember that we are all here due to our interest in our cars and this speed addiction we have. I am not out to profit, and this is a private party transaction with no obligations besides shipping the part to address provided once payment is received. None of this can be taken as a contractual obligation to complete a sale in any set manner.
Also, please no thread-crapping, and keep any issues to PMs. I will immediately report posts that damage my credibility or otherwise harm my FS thread. I will also refuse to do business with you regardless of how much you pester me about wanting the part.
I am open to offers, but generally ignore lowballs, or any offer that brings to price paid near 200% of shipping costs.
Feel free to review my iTrader feedback here, as well as my eBay feedback under the same user name. I have been scammed myself, and I assure you I conduct business properly.
Thanks for looking.
I'm going to be tearing down a year's worth of work. I'm definitely flexible, so if you're the least bit interested in anything, PM me an offer.
Everything purposely overpriced, because let's face it, you guys are lowballers.
BEGi System4.1 IHI Turbo kit - 1.6L
-intercooler and piping, from outlet to intake
-(1) VC47 Turbo, 3991 Compressor - This turbo has off idle boost, and holds 12psi to redline
-(2) VJ17 turbos, 4219 compressor, one in great shape, one rebuildable, all fittings - similar spool, but much more airflow, 16psi to redline
-BEGi cast mani
-BEGi seperated gases downpipe
-oil feed and drain
-heat shield
-airbox with MAF flange if needed
-2.5" K&N filter
-BEGi boost gauge
SOLD
PWR Aluminum Radiator
SOLD
FM clone frame rails
SOLD
Panasport 14x6 w/new Falken 912s, or without tires
-low miles on tires
-come with McGard spline drive lugs and key since you can barely get on stock lugnuts with these wheels
-Wheel finish isn't perfect, but wheels have very little curbage. One lip is polished, and I can do the others as well, as well as refinishing wheels in graphite.
-Only have two center caps, and one of those is cracked. Was going to make covers from hole plugs.
$375 + shipping
Also have added (see later pages):
Eibach 2.5" ID 200lb/in springs
Delrin diff mounts
Arkmage Intercooler w/piping
Dynomax 2.5" straight-thru muffler, 14" body, center offset
FM 2.5" dual exhaust
frankenstein T3 downpipe
(2) rebuildable motors
(1) Rosenthal rebuild kit and RockAuto bearings, ringset
Thanks guys, will still hang out for technical discourse, but need to focus on more important things right now.
EDIT: Car is parked and everything is being uninstalled today. Let me know what you want.
TERMS:
Please read!
Please PM me if you are interested. Feel free to post any questions, or express interest publicly if you wish, but I will respond to PMs first. I will update status of deals in the thread when I am able.
I will try and give buyers reasonable time to submit payment once a dealed is agreed to, in completion, by both parties. I will run for the hills screaming and sell to someone else if I feel that you may flake, change your mind, just aren't sure what you want, or continue to stall. If a deal is reached with another party during this time I will do my best to notify you immediately.
Shipping assumes lower 48, continental US.
Absolutely no returns or refunds. Insurance above standard carrier coverage (eg: UPS covers $100 value) is on your dime.
I reserve the right to refuse sale to anyone based on feedback, correspondence (including deal planning), or my preference of who to deal with in the instance of multiple interested parties. Also, once the part has been paid for the part is considered sold, regardless of what type of deal we were working on. Part WILL NOT be marked as sold until it is actually paid for.
I also reserve the right to remove item from sale as I wish, should I not need to liquidate it anymore.
Please remember that we are all here due to our interest in our cars and this speed addiction we have. I am not out to profit, and this is a private party transaction with no obligations besides shipping the part to address provided once payment is received. None of this can be taken as a contractual obligation to complete a sale in any set manner.
Also, please no thread-crapping, and keep any issues to PMs. I will immediately report posts that damage my credibility or otherwise harm my FS thread. I will also refuse to do business with you regardless of how much you pester me about wanting the part.
I am open to offers, but generally ignore lowballs, or any offer that brings to price paid near 200% of shipping costs.
Feel free to review my iTrader feedback here, as well as my eBay feedback under the same user name. I have been scammed myself, and I assure you I conduct business properly.
Thanks for looking.
Last edited by gospeed81; 05-09-2010 at 10:16 AM. Reason: I feel like I've done this once before...
#8
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Lots of interest, and I have access to the parts I need to do the conversion back to stock quickly.
Looks like I'll be going ahead with this, so deals will be firming up over the next few days.
Let me know if you need pics that I haven't posted up.
I will mark items already off the car as "Ready to Ship".
I am also changing the way I sell, and will be giving folks dibs, and exclusive time to send firm a deal and send payment.
Thanks for all the interest.
-Damon
Looks like I'll be going ahead with this, so deals will be firming up over the next few days.
Let me know if you need pics that I haven't posted up.
I will mark items already off the car as "Ready to Ship".
I am also changing the way I sell, and will be giving folks dibs, and exclusive time to send firm a deal and send payment.
Thanks for all the interest.
-Damon
#13
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
Sorry, lots of PMs...
Let me see...the GM IAT is going with the MS right now. If I find a buyer that doesn't need it I will send it your way uber cheap, but for someone switching to MS they'll need it.
Pics of COPS added, let me pull those over. The boost gauge will probably go with the kit as well, but I have a VDO Vision mechanical water temp gauge if that's what you're referring to.
At this moment I'd like to keep the items grouped as shown.
Let me see...the GM IAT is going with the MS right now. If I find a buyer that doesn't need it I will send it your way uber cheap, but for someone switching to MS they'll need it.
Pics of COPS added, let me pull those over. The boost gauge will probably go with the kit as well, but I have a VDO Vision mechanical water temp gauge if that's what you're referring to.
At this moment I'd like to keep the items grouped as shown.
#17
Elite Member
Thread Starter
iTrader: (51)
Join Date: Nov 2008
Location: Spring, TX
Posts: 7,257
Total Cats: 26
I have a deal pending on the MS, and will give him some time to follow through.
PMing on intercooler.
It's been said that they don't, at least not with the holes currently in them. Search "stein frame rail" for details.
Thanks.