323/Familia GTR Rods/Pistons
 

Looking to make a bunch of hp on the cheap? Good news! I've got a set of OEM Mazda GTR rods and pistons I wont be using. Basically as strong as it gets for OEM rods for the BP, and the fancy squeeze-cast pistons that will take more abuse as well, but without the piston slap! There's Famila people making 400hp on this setup, so it should be more than enough for most Miatas. Over a grand new when you could still get the pistons, and the rods themselves are north of $550 if you can find a set.

$450 (+3% for PayPal) shipped in the lower 48.

$400 (+3% for PayPal) shipped in the lower 48.

https://cimg1.ibsrv.net/gimg/www.mia...18dfa964a4.jpg

Sell
 

still available? What bore?

Still available. Stock 83mm bore.

I know the rods are fine, but will these pistons work alright with a 1.6 assuming no over bore? Pardon my ignorance

They will not, sadly. Stock bore on a B6 is 78mm, and you can't really go big enough on a 1.6 to use these pistons. Rods would work just fine, as you said.

Somebody on the festiva forums with a BP swap might want these

Yeaaaaah, but then I have to make an account on a Festiva forum.

Lowered price.

Any idea what compression ratio will these pistons put a 97 Miata engine at?

SOLD!

If the buyer falls through or decides they don't want them. I'll buy them. Just let me know.