FS - CO - MSM Head, M-Tuned Rods, Supertech Pistons - 1.8L
01-18-2012, 09:24 PM
#1
Junior Member
Thread Starter
iTrader: (4)
Join Date: Jun 2008
Location: Colorado
Posts: 344
Total Cats: 8
FS - CO - MSM Head, M-Tuned Rods, Supertech Pistons - 1.8L
I purchased a built motor. During break in, I found out the hard way that the thrust washers were installed backwards. So, I was left with a bad engine bottom. But, the pistons and rods are good and they only have about 200 miles on them.
I ended up building the bottom end of my MSM motor and used a VVT head, so I have the MSM head left over. The stock MSM head has about 54K miles on it. Was running fine.
I had a set of rods and pistons that were going to be used to build the MSM motor before I found the built motor, so I just used them in the MSM bottom end build. That is the reason the used rods and pistons are for sale.
M-Tuned rods have "5230" on the side of them
Supertech Pistons are 84mm and apprear to be 8.6:1
Bolts are whatever Belfab provides with their rods.
Complete MSM head including valve cover $500. SOLD
Price does not including shipping. Will probably ship on a pallet unless otherwise requested. Keeping the MSM oil cap, sorry, lol.
Pistons and Rods assembled - $420 shipped - SOLD
I do not want to separate at this time.
Pics of complete MSM Head:
Pics of Rods/Pistons set:
I ended up building the bottom end of my MSM motor and used a VVT head, so I have the MSM head left over. The stock MSM head has about 54K miles on it. Was running fine.
I had a set of rods and pistons that were going to be used to build the MSM motor before I found the built motor, so I just used them in the MSM bottom end build. That is the reason the used rods and pistons are for sale.
M-Tuned rods have "5230" on the side of them
Supertech Pistons are 84mm and apprear to be 8.6:1
Bolts are whatever Belfab provides with their rods.
Complete MSM head including valve cover $500. SOLD
Price does not including shipping. Will probably ship on a pallet unless otherwise requested. Keeping the MSM oil cap, sorry, lol.
Pistons and Rods assembled - $420 shipped - SOLD
I do not want to separate at this time.
Pics of complete MSM Head:
Pics of Rods/Pistons set:
Last edited by 05pearl; 01-21-2012 at 02:00 PM.
0
01-19-2012, 02:33 PM
#6
Newb
Join Date: Jan 2012
Posts: 2
Total Cats: 0
I'm very interested in the head. Please email me at bawtnet at gmail dot com.
Someone from the mazda-speed forums sent me your way. Thank you.
Someone from the mazda-speed forums sent me your way. Thank you.
Last edited by Kenn; 01-19-2012 at 02:39 PM. Reason: Unable to send PM due to low Postcount.
0
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
