FS in CT: 1.6 turbo kit, 1.6 MS3x and other turbo parts.
#1
Senior Member
Thread Starter
iTrader: (4)
Join Date: Jul 2006
Location: Shelton, CT
Posts: 675
Total Cats: 2
FS in CT: 1.6 turbo kit, 1.6 MS3x and other turbo parts.
All shipped prices assume you are in the USA, international shipping is extra. Please contact me via email. PMs will not be answered immediately. hmeeker at gmail dot com.
PRICE REDUCED - 1.6 Turbo Kit - $1250 obo, prefer local pickup, but can ship at your expense
This was originally a Greddy kit, but the only thing left of that now is the turbo, wastegate and oil feed line.
Includes all parts shown here.
https://i.imgur.com/KrCuFNB.jpg
Also this, since I forgot to put the intercooler in the pic
https://i.imgur.com/uEbYnLa.jpg
https://i.imgur.com/NjzGoNB.jpg
Close up of the manifold
https://i.imgur.com/MA6dBlI.jpg
List of parts
There is surface rust on this stuff, but nothing is through. I've used it for I think five years now and less than 10k miles.
If you insist on not getting an ECU I can include the Greddy pipe that hooks up to the stock airbox as well as the airbox plate for attaching a cone filter.
MS3x with 1.6 harness - SOLD
Details
VTPS with pigtail connector - SOLD
BEGI 2025 AFPR - SOLD
Bipes ACU - SOLD
Please contact me via email. PMs will not be answered immediately. hmeeker at gmail dot com.
PRICE REDUCED - 1.6 Turbo Kit - $1250 obo, prefer local pickup, but can ship at your expense
This was originally a Greddy kit, but the only thing left of that now is the turbo, wastegate and oil feed line.
Includes all parts shown here.
https://i.imgur.com/KrCuFNB.jpg
Also this, since I forgot to put the intercooler in the pic
https://i.imgur.com/uEbYnLa.jpg
https://i.imgur.com/NjzGoNB.jpg
Close up of the manifold
https://i.imgur.com/MA6dBlI.jpg
List of parts
- Artech axial manifold drilled for 10mm, ceramic coated with cerakote
- TD04h from Greddy kit
- Turbo Tony downpipe
- Stripes IC pipes and intercooler with mounting brackets.
- Recirc/blowoff valve (this one)
- FM heat shield (lightly modified to fit the TT downpipe)
- Drain hose
- Oil feed line
- Intake pipe and filter
There is surface rust on this stuff, but nothing is through. I've used it for I think five years now and less than 10k miles.
If you insist on not getting an ECU I can include the Greddy pipe that hooks up to the stock airbox as well as the airbox plate for attaching a cone filter.
MS3x with 1.6 harness - SOLD
Details
- Braineack built
- Includes boost solenoid
- Includes AIT sensor (you need to buy a bung)
VTPS with pigtail connector - SOLD
BEGI 2025 AFPR - SOLD
Bipes ACU - SOLD
Please contact me via email. PMs will not be answered immediately. hmeeker at gmail dot com.
Last edited by Harv; 10-01-2014 at 01:13 PM.
#2
Excuse my ignorance but what am I not understanding with the MS3x you've got for sale? Yours is listed for $45 more than a new one from Braineack (including the boost solenoid): https://www.miataturbo.net/miata-par...ssembly-14598/
#6
Senior Member
Thread Starter
iTrader: (4)
Join Date: Jul 2006
Location: Shelton, CT
Posts: 675
Total Cats: 2
DIYPNP is MS2 tech btw. Reverant can build you one of those (or Brain, but he prefers MS3x, I think Rev will also do MS3x if you want) if you want it, but ends up being close to the same price as MS3x when you start getting into the options that MS3x has by default.
#10
Senior Member
Thread Starter
iTrader: (4)
Join Date: Jul 2006
Location: Shelton, CT
Posts: 675
Total Cats: 2
So that would leave me with the IC pipes and downpipe. Hmmm. Not sure of price and not sure I want to part it out.
If anything the whole kit is probably low priced considering the manifold would probably go for $550 + shipping. I am not sure what the turbo goes for. Looks like it could go for several hundred? Not even sure how to price it.
If anything the whole kit is probably low priced considering the manifold would probably go for $550 + shipping. I am not sure what the turbo goes for. Looks like it could go for several hundred? Not even sure how to price it.
#12
Senior Member
Thread Starter
iTrader: (4)
Join Date: Jul 2006
Location: Shelton, CT
Posts: 675
Total Cats: 2
Turbo, manifold and downpipe are sold along with oil lines, intake and heat shield.
Still have Stripes IC setup that fits the Greddy. Has all pipes with good connectors and clamps and the IC with bung for AIT already welded in. Fits around PS/AC.
$200 + shipping to your location.
Also still have blowoff/recirc valve.
BEGI Miata turbo Bypass Valve - 1 3/8"
$50 shipped.
Still have Stripes IC setup that fits the Greddy. Has all pipes with good connectors and clamps and the IC with bung for AIT already welded in. Fits around PS/AC.
$200 + shipping to your location.
Also still have blowoff/recirc valve.
BEGI Miata turbo Bypass Valve - 1 3/8"
$50 shipped.
Thread
Thread Starter
Forum
Replies
Last Post