90-2005 parts clearance revisited and updated
Miata parts FS:
99-05 Exterior -99-00 Silver Passenger door shell -$75 -99-00 Silver Trunk decklid - $50 -x2 Power antennae - $50 Interior -Bose cd player and tape deck combo -$30 -Right and left manual window regulators (both) - $50 -Right and left POWER window regulators (both) - $100 -01-05 Power door locks with wiring harnesses (both) - $50 -01-05 power window switch Black - $50 -99-00 all factory relays - $5 per relay -99-00 dimmer switch -$5 -99-00 Power mirror controller - $5 -99-00 Gauge cluster -$20 -Gauges cluster hood - $15 Drivetrain -99-00 Automatic Transmission 30,000 miles on it Mint condition with torque converter and flex plate and flywheel bolts -$350 -99-00 Automatic Driveshaft - $50 -Complete 1.8 Brake caliper set with soft lines miles on them - $125 -99-00 Brake master cylinder and booster and proportion valve -$50 -Right and left front spindles with abs sensors -$30 per side -Right and left rear uprights with abs sensors - $30 per side -P/S rack with inner and outer tie rods - $35 -Complete P/S system with pump, all hoses and pressure lines, reservoir, and rack -$100 -Complete 99-00 Open diff with housing and r&p - $150 -Open differential no housing, individual unit - $30 -Used starter - $40 Engine Parts -ARP 1.8 head studs - SOLD -01-05 complete head with 40K on it perfect condition with intake manifold - $400 -99-05 brand new radiator with fans complete -$125 -Driver side radiator fan - $35 -x7 crank pulleys with crank trigger wheels - $10 -99-00 Coil Pack - $50 -99-00 Vacuum and map sensor rack- $35 -99-00 Automatic Ecu - $50 -x7 Water pump Pulleys - $5 per -99-00 Oil pan - $30 -99-00 Damaged head complete with camshafts - $100 -99-00 thermostat housing and various other cooling hard tubes and outlets - $5 per -99-00 Miata 3 inch straight pipe exhaust (was on a turbocharged 99 Miata) - $75 -99-00 Cam gears (Both) - $10 -99-00 Valve cover - $35 -Various A/C hoses - $5 per hose 90-97 Parts Exterior -Passenger headlight mechanism Interior -Driver airbags - $5 per -94-97 Passenger airbag Mint - SOLD -Passenger seat black leather custom wrapped no tears or rips - $15 -Passenger seat fabric no tears or rips -$10 -94-97 stereo surround - $15 Engine Parts -NON-P/S Idler pulley and bracket -$75 -94-97 Vacuum solenoids - $5 - 1.6 coil packs - $50 per -x5 90-97 A/c Radiator fans -$25 per -1 driver side Radiator fan - $35 -90-93 Crank and water pump V belt pulleys - $15 -90-93 alternator - $20 -Starter - $20 -90-93 Intake tube - $10 call me at 754 244 1755 thanks or email me Ryanckaufman@gmail.com some of the parts photos can be found here http://s224.photobucket.com/albums/d...rts/?start=all |
PMd you
|
Email sent for head studs.
|
everyone has been responded to
|
Payment sent for head studs.
|
Payment sent for AC relay, thanks.
|
Arp head studs are sold along with some relays
|
passenger and 1 driver airbag sold
|
pm sent for 99-00 coil pack.
|
Is the damaged '99-'00 head reparable? Can you post some photos and more details? Thanks.
|
In for damaged head pics too
|
somone dropped a bolt in cylinder number 4 and it bent the valves and scarred the combustion chamber surface pretty much good for parts or if you are a really good head guy ...u could prolly fix it
|
What condition are the cam shafts in?
|
It isn't listed, but by any chance do you have a NB rear passenger fender or rear bumper
|
camshafts appear to be in good conidition...selling as a pair $100 bucks plus shipping
nope no rear fender or bumper |
bumpity bump bump
|
Have any wiring for a 99? I need an iacv plug and tps plug if you do.
|
bump
|
Got the factory undertrays?
|
i have the one that fits in the front of the bumper...but not the main big one that connects to the subframe
|
i need one of those crank pulley. how much shipped to 40026?
|
like 20 bucks shipped to your door ...do u just need the pulley ?
|
yes just the crank pulley. converting my 1.6 to a multi rib belt. i have everything else.
also payment is sent. |
cool i got it i will ship it out asap!
thanks |
01-05 valve cover?
|
how much for the crank pulley shipped to 94705? Assuming it is a 99-00 pulley. Do you also have the crank position sensor from 99-00?
|
Originally Posted by mx5booster
(Post 727579)
how much for the crank pulley shipped to 94705? Assuming it is a 99-00 pulley. Do you also have the crank position sensor from 99-00?
|
Originally Posted by chicksdigmiatas
(Post 727181)
01-05 valve cover?
|
Originally Posted by gdnimr0d
(Post 727772)
you are looking at $20 shipped on the pulley and yes it is a 99-00 pulley ...I believe I have one good crank sensor from a 99-00
|
Mind shooting me a price for the damage head shipped to 75067?
|
it would be around $150 shipped to your door
|
calipers come with brackets? ship to canada?
|
Friendly reminder to please check if you have a good 99-00 crank angle sensor.
|
hi what gears do you have 4,10 or 3,9
|
wish i could pm you
|
Bump for a good seller. Crank pulley arrived today in great condition. Thanks again Ryan!
|
everyone has been pmed ...currently i have no ring and pinion sets sorry
|
everything is being shipped out today
thanks |
Would be down for the 3" exhaust and maybe the oil pan. I assume the exhaust has the hangers and what not to mount? I have the rubber hangy bits just wanna put on car and not weld. Downpipe back to bumper. Could see a pic on the link. Can't PM yet, just a newb.
|
the exhaust is complete with hangers and such but shipping it to you woudl require cutting it...pm me if you are serious
|
01 - 02 power lock work for 99 ? how much will you shipped to 95122 ?
|
did you end up selling the messed up head? if not ill take it.
|
power locks were sold along with the messed up head...I have another 99 head I just got that is in perfectly good shape just needs to be decked looking for around 275 plus shipping for it
|
I know Twibs called dibs, but put me down for a #2 on that second head if it falls through.
|
that head is all you. im looking for a valve train for cheap.
|
the head is very close to the wear bar I am going to have it taken to the machine shop and have it decked before it gets sold or listed ....after being decked it will be at the bare minimum thickness for the head....
heres some info on heads......heads that have never been decked maintain the most amount of volume for the combustion chamber along with maintaining exact factory cam timing. as you cut and cut the head down to the minimum thickness the volume in the combustion chamber is decreased and the cam timing is retarded...this head still works perfect and is in perfect shape its just going to be at the minimum head thickness |
Also interested in the head. What's the price after the deck.
|
after decking the head i will sell the head for $325 shipped in the continental US I am going to bring it to the head shop today soo i should have photos of it completed by tonight or tomorrow...i will keep you all posted
thanks! |
Sending PM...
|
All times are GMT -4. The time now is 11:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands