|
99' Motor partout (Head, VC, Injectors, IM, Accecories, etc..)
8 Attachment(s)
Have a blown up 1.8 that I am parting out... ~80,000 miles on just about everything...
Name: Brian Location: Southern NJ Polished Valve Cover - $60 + Ship (SOLD) https://www.miataturbo.net/attachmen...ine=1382357312 1.8 Cylinder head ***Pending dis-assembly and inspection*** (PENDING LOCAL SALE 10/22) - (Without IM) $300 + Ship 1.8 Intake Manifold (No throttle body) - $100 + Ship https://www.miataturbo.net/attachmen...ine=1382357312 Starter - $20 + Ship (Sold) https://www.miataturbo.net/attachmen...ine=1382357312 Alternator - $20 + Ship (Sold) https://www.miataturbo.net/attachmen...ine=1382357312 A/c Compressor - $30 + Ship https://www.miataturbo.net/attachmen...ine=1382357312 P/s Pump - $30 + Ship https://www.miataturbo.net/attachmen...ine=1382357312 1.8 Stock Injectors - $50 + Ship 1.8 Stock Fuel rail - $15 + Ship (SOLD) https://www.miataturbo.net/attachmen...ine=1382357312 1.8 Engine Wiring Harness's (Not including injector harness) - All connectors in tact, nothing cut apart - $50 + Shipping (SOLD) http://i119.photobucket.com/albums/o...ps78ebce52.jpg |
will you sell the oilpan/baffle?
may also be interested in the fuel rail(sans harness and injectors) |
1 Attachment(s)
Originally Posted by psyber_0ptix
(Post 1065122)
will you sell the oilpan/baffle?
may also be interested in the fuel rail(sans harness and injectors) https://www.miataturbo.net/attachmen...ine=1382359374 |
Interested in the head and intake manifold if not in bad shape.
|
holy....
the mixing manifold/lower coolant inlet is ok? |
Is the injector harness section avalible separately? Because I need one, plus I'd take the valve cover and fuel rail off your hands.
|
Originally Posted by Gijeff1805
(Post 1065157)
Interested in the head and intake manifold if not in bad shape.
Originally Posted by psyber_0ptix
(Post 1065166)
holy....
the mixing manifold/lower coolant inlet is ok? I believe so... I'll check that in a minute
Originally Posted by EO2K
(Post 1065219)
Is the injector harness section avalible separately? Because I need one, plus I'd take the valve cover and fuel rail off your hands.
|
2 Attachment(s)
Originally Posted by psyber_0ptix
(Post 1065166)
holy....
the mixing manifold/lower coolant inlet is ok? https://www.miataturbo.net/attachmen...ine=1382383914 https://www.miataturbo.net/attachmen...ine=1382383914 |
how high of rpm did the engine go? (just curious)
|
Originally Posted by BTMiata
(Post 1065296)
Is this what you are referring to?
paypal? |
Originally Posted by silvermazda
(Post 1065384)
how high of rpm did the engine go? (just curious)
Originally Posted by psyber_0ptix
(Post 1065455)
yes, i'll take that and the fuel rail
paypal? |
2 Attachment(s)
Any tips for removing the head? I took out all of the head bolts, but it feels like something is still holding it down. There are 2 large Hex heads in the middle... do I have to take those out ?
https://www.miataturbo.net/attachmen...ine=1382443807 https://www.miataturbo.net/attachmen...ine=1382443807 |
You have to break the seal of the head gasket, use a rubber mallet or I used a small prybar, but don't pry between the mating surfaces because you do not want to indent the head surface. I found places on the motor for leverage to separate it from the block. If that makes any sense.
|
Yeah I pryed on a couple spaces and got it to move but I was a bit hesitant to keep prying without knowing if something else was holding it back that I was about to break lol. I'll pry a bit more... I found a nice solid spot to pry that dosen't interfere with the mating surface
|
As long as there isn't any hoses or pieces left connected to the head from the block, then you just have to work your way around the head breaking the seal.
|
Originally Posted by Gijeff1805
(Post 1065533)
As long as there isn't any hoses or pieces left connected to the head from the block, then you just have to work your way around the head breaking the seal.
|
Still have
1.8 Injectors - $55 Shipped Intake Manifold - $100 + Shipping All Engine Accessories - Prices in OP |
Hm..once I get home I can take a look to see what might be keeping it, but I am def. interested in the intake manifold and head once you get it off. There is two dowels that align the head and the block.
|
Originally Posted by Gijeff1805
(Post 1065565)
Hm..once I get home I can take a look to see what might be keeping it, but I am def. interested in the intake manifold and head once you get it off. There is two dowels that align the head and the block.
|
Just FYI everyone... Had a few people interested in the head.
Someone messaged me local, so I will have to put that into consideration first to avoid the hassle of shipping. If the local guy falls through I will be PM'ing those who were interested in the order which I received PM's, to see if anyone still wants it shipped... |
| All times are GMT -4. The time now is 07:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands