imputs part out part 2 (turbo kit, steering knuckles, and a ton more shit)
#1
imputs part out part 2 (turbo kit, steering knuckles, and a ton more ****)
Work lug nuts. Price: $85 SHIPPED
Front SCCA Red tow hook: $20 SHIPPED
Rear SCCA Red tow hook $20 SHIPPED
Turbonetics Boost Controller w/ mount. Price: $75 Shipped
Custom coolant catch can setup. Price: $335 SHIPPED
-includes valve cover with sparkly tribal yellow paint w/ -8AN bung
-AN fittings and PTFE coated -8 SS lines
-custom billet aluminum baffled oil catch can and mount w/ filter
Flyin' Miata duel feed fuel rail. Price: SOLD
RC 440 CC SL9-440 Injectors w/ injector clips (not pictured). Price $150 Shipped
-these were flow tested/cleaned before I got them (about a year ago 10-15k miles)
__________________________________________________ _______________________
CUSTOM TURBO SETUP. PRICE $3,175 SHIPPED
-it took me forever to set this up properly, this is one of the most reliable, quick spooling turbo kits I have experienced. There is absolutely NO lag, instant power, boost basically starts when you touch the throttle. Only uses 4 clamps, intake/intercooler piping is super short for response.
Acceleration video (8-9psi) 0-60
-AVO MANIFOLD (super fast spool design, coated w/ 2000 degree jet coating, relief cut)
-GARRETT GT2554R Turbo (all AN water/oil fittings, modified aluminum piping welded on)
-very little to no shaft play
AVO Downpipe (2 02 Bungs, 1 EGR bung)
modified intercooler w/ custom endtanks wrapped in reflective gold tape
(you can still retain factory AC setup, just need to lower radiator)
custom 2.5" over the intercooler piping setup (super short, sparkly tribal yellow paint)
(Greddy BOV flange & IAT bung)
-Authentic Greddy Type RS BOV
-custom 2.5" intake w/ massive K&N filter (super short piping)
-PTFE coated SS oil drain & oil feed line (extra long) w/ AN fittings
- -6AN pushlock hoses for collant (reflective gold heat wrapped)
This setup only uses 4 couples. They are all extremely good quality, real 5ply w/ proper T-Bolt clamps (you'll never have to worry about boost leak)
-radiator shrowd
__________________________________________________ _______________________
Level7Tune Steering Knuckles: SOLD
Front SCCA Red tow hook: $20 SHIPPED
Rear SCCA Red tow hook $20 SHIPPED
Turbonetics Boost Controller w/ mount. Price: $75 Shipped
Custom coolant catch can setup. Price: $335 SHIPPED
-includes valve cover with sparkly tribal yellow paint w/ -8AN bung
-AN fittings and PTFE coated -8 SS lines
-custom billet aluminum baffled oil catch can and mount w/ filter
Flyin' Miata duel feed fuel rail. Price: SOLD
RC 440 CC SL9-440 Injectors w/ injector clips (not pictured). Price $150 Shipped
-these were flow tested/cleaned before I got them (about a year ago 10-15k miles)
__________________________________________________ _______________________
CUSTOM TURBO SETUP. PRICE $3,175 SHIPPED
-it took me forever to set this up properly, this is one of the most reliable, quick spooling turbo kits I have experienced. There is absolutely NO lag, instant power, boost basically starts when you touch the throttle. Only uses 4 clamps, intake/intercooler piping is super short for response.
Acceleration video (8-9psi) 0-60
-AVO MANIFOLD (super fast spool design, coated w/ 2000 degree jet coating, relief cut)
-GARRETT GT2554R Turbo (all AN water/oil fittings, modified aluminum piping welded on)
-very little to no shaft play
AVO Downpipe (2 02 Bungs, 1 EGR bung)
modified intercooler w/ custom endtanks wrapped in reflective gold tape
(you can still retain factory AC setup, just need to lower radiator)
custom 2.5" over the intercooler piping setup (super short, sparkly tribal yellow paint)
(Greddy BOV flange & IAT bung)
-Authentic Greddy Type RS BOV
-custom 2.5" intake w/ massive K&N filter (super short piping)
-PTFE coated SS oil drain & oil feed line (extra long) w/ AN fittings
- -6AN pushlock hoses for collant (reflective gold heat wrapped)
This setup only uses 4 couples. They are all extremely good quality, real 5ply w/ proper T-Bolt clamps (you'll never have to worry about boost leak)
-radiator shrowd
__________________________________________________ _______________________
Level7Tune Steering Knuckles: SOLD
Last edited by imput1234; 06-24-2013 at 10:17 PM.
#3
It does not include SS lines/AN fittings, super short intercooler piping. Greddy BOV, jet coated manifold, and more.
Engine bay picture, how everything will look mounted.
3e4a7bab.jpg?t=1333930596
But the prices are OBO, feel free to make me an offer, worst I'll say is no.
#4
I'm a terrible person
iTrader: (19)
Join Date: Apr 2009
Location: Arizona
Posts: 7,174
Total Cats: 180
Flyin' Miata : Turbochargers : 1996-97 : 1996-97 FM turbo kit - no electronics
Unless your kit includes electronics, the FM kit w/o electronics is 2995.
How many miles are on this kit? Is everything included to mount the intercooler?
Unless your kit includes electronics, the FM kit w/o electronics is 2995.
How many miles are on this kit? Is everything included to mount the intercooler?
#5
Flyin' Miata : Turbochargers : 1996-97 : 1996-97 FM turbo kit - no electronics
Unless your kit includes electronics, the FM kit w/o electronics is 2995.
How many miles are on this kit? Is everything included to mount the intercooler?
Unless your kit includes electronics, the FM kit w/o electronics is 2995.
How many miles are on this kit? Is everything included to mount the intercooler?
Yes, everything needed is included.
#7
I'm a terrible person
iTrader: (19)
Join Date: Apr 2009
Location: Arizona
Posts: 7,174
Total Cats: 180
15" x 8" x 3" intercooler
2.0" ID - 2.5" ID pipes from compressor to intercooler
2.5" ID pipes from intercooler to throttle body
2.0" ID - 2.5" ID pipes from compressor to intercooler
2.5" ID pipes from intercooler to throttle body
#15
I'm a terrible person
iTrader: (19)
Join Date: Apr 2009
Location: Arizona
Posts: 7,174
Total Cats: 180
I was trying to be nice since this is your F/S thread and you can price **** however you want. But stop fighting this. The kit I linked to was the FM II kit WITH the intercooler and no electronics. That is 2995 NEW. UNLESS your kit comes with some form of electronics then why would I link to an FM kit with electronics?
Once again:
FM Kit w/ intercooler, w/o electronics 2995
Voodoo kit w/o intercooler w/ electronics 2995
FM Kit w/ intercooler w/ electronics 33xx
You've made your case why you believe your price is fair, that is all I wanted.
Put your highlighter bs away.
Did you happen to look at the last option on that table you posted smart guy?
Once again:
FM Kit w/ intercooler, w/o electronics 2995
Voodoo kit w/o intercooler w/ electronics 2995
FM Kit w/ intercooler w/ electronics 33xx
You've made your case why you believe your price is fair, that is all I wanted.
Put your highlighter bs away.
Did you happen to look at the last option on that table you posted smart guy?
#16
I was trying to be nice since this is your F/S thread and you can price **** however you want. But stop fighting this. The kit I linked to was the FM II kit WITH the intercooler and no electronics. That is 2995 NEW. UNLESS your kit comes with some form of electronics then why would I link to an FM kit with electronics?
Once again:
FM Kit w/ intercooler, w/o electronics 2995
Voodoo kit w/o intercooler w/ electronics 2995
FM Kit w/ intercooler w/ electronics 33xx
You've made your case why you believe your price is fair, that is all I wanted.
Put your highlighter bs away.
Did you happen to look at the last option on that table you posted smart guy?
Once again:
FM Kit w/ intercooler, w/o electronics 2995
Voodoo kit w/o intercooler w/ electronics 2995
FM Kit w/ intercooler w/ electronics 33xx
You've made your case why you believe your price is fair, that is all I wanted.
Put your highlighter bs away.
Did you happen to look at the last option on that table you posted smart guy?
But I am not fighting anything. You can get kits that are priced significantly higher than mine, or ones that are ridiculously lower.
There are several different options available.
My price is what it is, like I said several times, feel free to make me an offer if you are interested. If not, then thanks for bumping my thread.