Almost complete DIY turbo setup
 

I was going to upgrade my setup...but need money more than more speed...and have become content with what I've got after upgrading exhaust and going to COPS. I've been putting this off...but I don't have time to finish this with school...and just need to sell it before I end up out in the garage trying to dump my baby IHI and putting the T25 on there. If you buy parts from me you will be helping boost my GPA this semester.


Parts available:

T25 turbo - makes boost...but needs a rebuild. Includes the special outlet bend. This is pretty much the perfect turbo for a street driven 1.6L. I REALLLLY wanted to upgrade to this...but I'm seriously on the verge of flunking out and a divorce...seriously.

Attachment 202944

SOLD

Pic of the setup on Sam's car...also showing the intake elbow for compressor:

Attachment 202945


OBX 1.6L turbo manifold -

Attachment 202946

SOLD




Custom downpipe - from Samamporful...and still in his hands. He can ship to you...or I'll get it to you as soon as it's in. This dp goes all the way back to end of cat...so consider it a cat delete/testpipe as well. Would bolt up to a cat-back exhaust.

SOLD




Bosch recirc BOV with BEGi piping - also still in Sam's possesion. Good setup...exactly like what I run with my current BEGi IHI kit.

SOLD



Big intercooler - will check dimensions when I get home...but it works with the "Stripes Pipes" kit below.

Attachment 202947

SOLD




Stripe's Pipes kit - Little rust and paint flaking...but this kit is so damn sturdy it doesn't matter...just grind and repaint. Will do this for you if you need and pay...but you'll be killing my study time. Comes with cheap BOV and all couplers adapters.

Attachment 202948

SOLD





Fidanza adjustable cam gear - bought thinking I needed it for top end...I don't.

Attachment 202949

SOLD





Devil's Own universal stage 1 kit - I will probably use this...but am putting it up if someone else really needs it and in case it's the first thing to sell. Has the four wire leads to the relay chewed through by a pup...but I will repair before shipping. This is considered in the price...and WILL NOT affect performance as there is tons of wire there (maybe they wanted this relay under dash?). Mangled part of harness on bottom left by nozzles (3 and 7 gph). I will likely repair this today.

Attachment 202950

$200





Mazda Protege 1.6L Valve Cover - (black) with gasket, used for exposing cam gears.

Attachment 202951

SOLD




Infinit M45 HID Assemblies One is missing the blinker bulb...the other is missing the high beam buld...the low-beam HIDs have everything there...and only need a 12+ and ground to run. Halo might be more complicated.

Attachment 202952

$75




Goodridge Stainless Brake Lines - new in box...don't really want to sell...but studying more than working these days.

Attachment 202953

SOLD





Oil temp, water temp and boost gauges with angled faceplate and sensors - water and boost are AutoMeter carbon lights or something. Have bulbs and sensors in bag. Will split up...just let me know what you need.

Attachment 202954

SOLD




All prices are considered a starting point and are NEGOTIABLE.


If you want any kind of package deal we can definitely work something out and save you some serious coin while helping me clean out the garage. They more parts gone the better since once I sell one part the rest of it is basically worthless to me.

If you want ALL of the turbo parts (excludes cam gear and WI) I will let it go for $550 or your close interpretation of its value. All the turbo parts came from Samamporful's recent FS thread...all the intercooler/piping parts came from jmknight's recent FS, as did the WI. Fidanza gear is new from Moss Motors.

Shipping will be actual on large parts...we can include it for most of the small parts.

I will get good pics tonight or tomorrow...but need to drum up interest.

Thanks for looking...take care.

-Damon

interested in DP

pic of VC?

Will take some in the morning. It's in great shape...looks like every other black Protege cover I've ever seen. Has the bare aluminum accent lines on it which I was going to polish up. Pretty sharp really.

ohh interested!!

I will ship accordingly. If something is purchased from the turbo kit that is in my posession, mainly the downpipe, contact gospeed and send payment to HIM. NOT ME.

sam, can you post a pic of the dp, what diameter, will it mate to begi cast manifold

It most likely wont work with a begi cast combo without modification to the downpipe. Pics are at home with my memorycard but unless you plan on doing some minor welding then no.

What diameter is the pipe? Send me some pics when you get a chance.

Updated with my own pics from this morning...and some items added.

Feel free to send offers...I priced everything high knowing you guys and your need to lowball. The worst I can do is say "no," but I'll probably just meet you in the middle and include shipping.

I would prefer to sell everything all at once...so more offers on more items means lower prices.

Thanks.

would you part with the sensor for the water temp?

Nope...goes with gauge...sorry.

Still want the valve cover? Will be going by post office today to send hustler all this gay pron I'm getting rid of.

Package deal 1:

Exhaust manifold
Downpipe
Turbo w/compressor elbows and wastegate actuator
Intercooler
Piping kit w/couplers
Bosch Recirc BOV with BEGi piping

$550 +shipping



Package deal 2:

WI
Cam gear

$250




Package deal 3:

Package 1 + Package 2

$750 + shipping



Package Deal 4:

Everything in thread

$1000

Is this the same stripes kit that works for stock greddy setup?

As far as I know yes...it is THE Stripes kit.

It has a compressor outlet sized bend that appears to work when clocked towards the driver wheel well.

PM sent

1.6 or 1.8 Manifold?

Damn...good question...left that out.


They are 1.6L manifolds.

The downpipe is a custom job for a 1.6L car with this manifold/turbo setup...and surely will need modification for anything else.

will this manifold work for the greddy turbo?

That's a TD04 right (no experience with Greddy), and these manifolds are for the T25 footprint.

So...I think so.

Intercooler kit with piping and BOV sold.

Buyer got a good deal I might add. 74% of above prices (shipped)...so don't be afraid to send offers...especially for package deals.

ok I will let you know something im thinking bout the manifold and downpipe if it will work with my greddy turbo

Gauges and adjustable cam gear are spoken for...sale pending.


I will cut a HUGE deal for the hotside parts (turbo, mani, downpipe). This setup should stay together since it's a custom downpipe made for this turbo and manifold.

Garrett SR20 T25
1.6L manifold
Custom 2.5in downpipe with cat delete/test pipe built in

$350

Gauges, faceplate and cam gear sold.

All prices lowered!!!

Turbo/mani/dp combo comes out to $300 now.

bump for some newbs that were asking


I still have:

WI kit
Mani/turbo/downpipe combo
Protege valve cover
HIDs
Stainless brake lines

very interested in the mani/turbo/downpipe combo. just have one question before i make an offer.. how much would you charge to ship it to the atlanta area?

It would be about $30.

$300? That's pretty low someone should buy this

ill give you $320 for them shipped..?

i cant pm yet so if you want to talk send me an email...br41nd3d@gmail.com

Deal. Emailing.

so if i send the money as a gift you get all of it correct?
trying to get 10 posts haha

That is correct.

The downside is that you can't dispute it later I believe. Hopefully my feedback speaks well of me.

EDIT: And I've always done it only for $20 and $50 spots...they may actually care about missing fees on $300.

I was just saying IF you did that to make sure and get me your shipping addy somehow.

i sent it as a gift just now..
so you should have the money

here is my address and stuff...

Alright...I've got it.

You should edit this post and the one with your email so that info doesn't end up on all kinds of mailing lists.

Thanks for payment...will get it out tomorrow.

-D

Hot side parts are SOLD!

I'll probably hold on to everything else...but feel free to send an offer.

Except for the Protege valve cover...it's still up for grabs. Sam Amporful but and painted a badass one for me.

thanks.

Let me know if you got PM.

got it

Good deal.

Welcome to the forum.

Go post up in the Meet n' Greet section if you haven't already.

Whats the lowest you'll take for the valve cover shipped?

I always love that question...it's like a cop asking how fast I thought I was going.

So do I lie and piss him off...or shoot myself in the foot?

Shoot me an offer. I'm not too worried about the value of the part...but shipping is a little more for this thing. I can't remember for shit...but feel like I paid about $60 for it shipped...so I'm already losing.

Valve cover SOLD.


I plan on installing the other parts...but if you really want something shoot me an offer.

I've had most of this on shelves for months...and I'm swamped with school. None of it will hit the car anytime soon.

Thanks to all buyers and those that vouched for me. I hope everyone is happy with their parts and service.

Interested in the brake lines, you have a PM.

SS brake lines are SOLD.

Headlights available at the moment but pending.