Any interest in a NA6 dash with speedhut gauges?
 

I am thinking about going to a full digital dash so wanted to see if anyone was interested in buying the gauge cluster I built with SpeedHut gauges for my LFX swap. Even though it is already calibrated for a V6, it will easily work with a stock engine or a v8 as well. I modified the housing to fit the gauges and they were epoxied in place in a NA6 cluster. It turned out really clean and almost looks factory. All gauges have worked flawlessly, but the car has transformed from a street car to pretty much a 100% track car and I could benefit from a fully integrated dash.

https://cimg5.ibsrv.net/gimg/www.mia...e12f0ddbbb.jpg


It is a GPS speedo so no need to worry about a VSS signal.

The tach can be adjusted to sync to a 4/6/8/12 cyl.

Fuel gauge is already calibrated for a MX5 in tank sending unit but the cluster will come with the calibration cable so it will work with almost any sending unit.

Oil pressure is a separate sending unit as well as the water temp. Probably best to just get new sending units for these and they are linked to the correct units.


Link above is to almost the same kit except this speedo has the turn and hi beam indicators. New it was just over $700 for just the gauges, so I'm thinking $700 is fair, but may be open to a close offer. Too much less than that and I would rather just keep them because a digital dash is going to cost me.

PM me if interested and I am happy to get more photos/videos for anyone actually interested.

Sold