imputs part out part 2 (turbo kit, steering knuckles, and a ton more shit)
#1
imputs part out part 2 (turbo kit, steering knuckles, and a ton more ****)
Work lug nuts. Price: $85 SHIPPED
Front SCCA Red tow hook: $20 SHIPPED
Rear SCCA Red tow hook $20 SHIPPED
Turbonetics Boost Controller w/ mount. Price: $75 Shipped
Custom coolant catch can setup. Price: $335 SHIPPED
-includes valve cover with sparkly tribal yellow paint w/ -8AN bung
-AN fittings and PTFE coated -8 SS lines
-custom billet aluminum baffled oil catch can and mount w/ filter
Flyin' Miata duel feed fuel rail. Price: $225 SHIPPED
-comes w/ SS lines/fittings, plugs right into stock.
RC 440 CC SL9-440 Injectors w/ injector clips (not pictured). Price $150 Shipped
-these were flow tested/cleaned before I got them (about a year ago 10-15k miles)
__________________________________________________ _______________________
CUSTOM TURBO SETUP. PRICE $3,575 SHIPPED
-it took me forever to set this up properly, this is one of the most reliable, quick spooling turbo kits I have experienced. There is absolutely NO lag, instant power, boost basically starts when you touch the throttle. Only uses 4 clamps, intake/intercooler piping is super short for response.
Acceleration video (8-9psi) 0-60
-AVO MANIFOLD (super fast spool design, coated w/ 2000 degree jet coating, relief cut)
-GARRETT GT2554R Turbo (all AN water/oil fittings, modified aluminum piping welded on)
-very little to no shaft play
AVO Downpipe (2 02 Bungs, 1 EGR bung)
modified intercooler w/ custom endtanks wrapped in reflective gold tape
(you can still retain factory AC setup, just need to lower radiator)
custom 2.5" over the intercooler piping setup (super short, sparkly tribal yellow paint)
(Greddy BOV flange & IAT bung)
-Authentic Greddy Type RS BOV
-custom 2.5" intake w/ massive K&N filter (super short piping)
-PTFE coated SS oil drain & oil feed line (extra long) w/ AN fittings
- -6AN pushlock hoses for collant (reflective gold heat wrapped)
This setup only uses 4 couples. They are all extremely good quality, real 5ply w/ proper T-Bolt clamps (you'll never have to worry about boost leak)
-radiator shrowd
__________________________________________________ _______________________
Level7Tune Steering Knuckles: $300 SHIPPED
-arguably the best steering knuckles on the market, made by FormulaD driver Chelsea DeNofa
-more steering angle than you will ever need
Front SCCA Red tow hook: $20 SHIPPED
Rear SCCA Red tow hook $20 SHIPPED
Turbonetics Boost Controller w/ mount. Price: $75 Shipped
Custom coolant catch can setup. Price: $335 SHIPPED
-includes valve cover with sparkly tribal yellow paint w/ -8AN bung
-AN fittings and PTFE coated -8 SS lines
-custom billet aluminum baffled oil catch can and mount w/ filter
Flyin' Miata duel feed fuel rail. Price: $225 SHIPPED
-comes w/ SS lines/fittings, plugs right into stock.
RC 440 CC SL9-440 Injectors w/ injector clips (not pictured). Price $150 Shipped
-these were flow tested/cleaned before I got them (about a year ago 10-15k miles)
__________________________________________________ _______________________
CUSTOM TURBO SETUP. PRICE $3,575 SHIPPED
-it took me forever to set this up properly, this is one of the most reliable, quick spooling turbo kits I have experienced. There is absolutely NO lag, instant power, boost basically starts when you touch the throttle. Only uses 4 clamps, intake/intercooler piping is super short for response.
Acceleration video (8-9psi) 0-60
-AVO MANIFOLD (super fast spool design, coated w/ 2000 degree jet coating, relief cut)
-GARRETT GT2554R Turbo (all AN water/oil fittings, modified aluminum piping welded on)
-very little to no shaft play
AVO Downpipe (2 02 Bungs, 1 EGR bung)
modified intercooler w/ custom endtanks wrapped in reflective gold tape
(you can still retain factory AC setup, just need to lower radiator)
custom 2.5" over the intercooler piping setup (super short, sparkly tribal yellow paint)
(Greddy BOV flange & IAT bung)
-Authentic Greddy Type RS BOV
-custom 2.5" intake w/ massive K&N filter (super short piping)
-PTFE coated SS oil drain & oil feed line (extra long) w/ AN fittings
- -6AN pushlock hoses for collant (reflective gold heat wrapped)
This setup only uses 4 couples. They are all extremely good quality, real 5ply w/ proper T-Bolt clamps (you'll never have to worry about boost leak)
-radiator shrowd
__________________________________________________ _______________________
Level7Tune Steering Knuckles: $300 SHIPPED
-arguably the best steering knuckles on the market, made by FormulaD driver Chelsea DeNofa
-more steering angle than you will ever need
Thread
Thread Starter
Forum
Replies
Last Post
Andifer
Miata parts for sale/trade
8
09-23-2015 05:43 PM