ARTech Goodies, Enthuza 3", SR20 T25, FM Happy Meal, 3.9 torsen, and more! (1.6)
 

Hello. Looking to unload a few things I had been acquiring for the last year. Unfortunately I've lost interest in this project and am looking to fund a different one at the moment before moving.

Willing to offer deals to those wanting multiple items (such as downpipe/manifold + lines + turbo + exhaust)
Preferred payment through Paypal. Everything will be shipped via USPS or FedEx Ground, whichever is more economical/makes the most sense. (However will ship by other means if the buyer asks)
Can also arrange local pickup if desired. (Everything is located in Shreveport, Louisiana)

Please feel free to PM me if you have any questions. If I've forgotten anything I'll be sure to update this post.
Lastly, if any of these prices seem unreasonable or misvalued, please let me know!

Thanks much!
__________________________________________________ ______________
Brand New/Never Installed ARTech 1.6 Downpipe and Manifold. Retains A/C and Power Steering. $500 + Shipping (no fabrication wait times!)
The downpipe is a 3" exit and the both were made to fit a GT2554r or similar very nicely. Both are stainless steel. SOLD!
Attachment 180645

Attachment 180646

Attachment 180647

Attachment 180648

Brand New/Never Installed ARTech Oil/Water line kit. $100 + Shipping SOLD
Attachment 180649

Rebuilt Garrett SR20 T25 Turbo. Little to no shaft play. Includes various lines that came with it. $275 + Shipping SOLD

Attachment 180650

Attachment 180651


3.9 Torsen Conversion Kit. Includes carrier, 3.9 Torsen out of an NB, axles, and driveshaft. $800 + Shipping TORSEN SOLD. Axles and Driveshaft still available. Make me an offer!

Attachment 180652

Attachment 180653

Attachment 180654

Full 3" Enthuza Exhaust system + High flow cat. $440 SOLD

Attachment 180655

Brand new 1.6 (though compatible with 1.8) Flyin Miata Happy Meal clutch + 10.3 lb Flywheel + stainless clutch line. Also includes the clutch tool, bearings, and starter bypass. $450 + Shipping SOLD

Attachment 180656

NEW Toyota COPs with pigtails. I believe these plugs are for an Avalon but i'm not 100% sure. $100 + Shipping SOLD

Attachment 180657

Washer Fluid Relocation tank. Forget who makes these on here, but it's real nice! $100 + Shipping SOLD

Attachment 180658

Attachment 180659

NEW Tuner Toys dual feed fuel rail for 1.6 (not sure on compatibility with 1.8). $100 + Shipping

Attachment 180660

Flyin Miata Aluminum Blank Cluster panel for NA/NB. It's a bit scratched up on the back, but I suppose it's the back so it doesn't matter much. $20 + Shipping SOLD

Attachment 180661

Are there any differences between the FM happy meal b/t the 1.6 and the 1.8 kits?
On their website both are the same part number; PM me shipping estimate to 98178?

Interested in the washer bottle but there's no cap or flange?

Enthuza PM sent

Manifold and downpipe are an absolute steal. I am not sure how those have not sold yet.

Maybe because 1.6L? Either way, Abe's work is pretty awesome. All that heavy duty stainless sanitary/tri-clamp piping and reducers. (Usually found in processing plants or breweries)

No cap or flange for the washer bottle. It didn't come with one actually, and I'm not super sure what you're supposed to use in it's place.

Replying to all PM's now!

That's curious. FrankB's thread shows them with a welded bung for a cap.

It's about $25 on summit racing plus cost if welding. Can you measure the diameter of the hole?

pm'd about the lines and COPs

Sure can. I'll respond back when I get home from work today.


Enthuza Exhaust Sold!
All PMs have been responded to!

I'll send you a PM, still interested.

I'm not 100% sure on the differences to be honest. I'm pretty sure that the 1.6 clutch plate is a bit smaller than the 1.8 and has less power potential (good up to about ~300whp I believe) and that it could be a bit lighter than the 1.8. I do know that they are interchangeable though with no modifications needed.

Somebody here might know more than me; or perhaps contact FM directly.

Washer fluid tank sold!

I'm in for the happy meal if the other guy doesn't take it. I can't pm yet though but you can email if that's alright. Quinncavolo@gmail.com thank you.

https://www.flyinmiata.com/fm-clutch-happy-meal-na-nb.html

it should be fine since you basically convert the 1.6 to a 1.8

Yeah I'll take the happy meal clutch. PM me with shipping cost (to 98178, Seattle) and I'll send you via PayPal.

My apologies, a few other people already beat you to the punch.


Clutch and Turbo have been sold!

How much would shipping the manifold and dp to 98178 be?

PM re Differential

PM'd.

All other PMs replied to!